CG T6 turbo build - Forums at Modded Mustangs
 5Likes
Reply
 
LinkBack Thread Tools
post #1 of 94 Old May 2nd, 2016, 03:20 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
CG T6 turbo build

So I figured I would join the party with all the turbo builds going on. The car has been down since September of 2014. Im getting ready to start the installing everything to get it back on the road again. Here is a list of what's going on.

Engine ( built and on stand)
fully forged shortblock
mhs stage 3 heads
cms stage 2.5 turbo cams
Edelbrock intake
6061 intake

Turbo kit (just haven't picked turbo out yet)
CG T6 turbo hotside
on3 cold side
turbo charger leaning towards work turbo chargers turbo
dual 40 mm wastegates

Transmission (ordered should be here in 2wks)
FB performance 4r70w with lockup and transbrake
UCC converter

Fuel
Glenn's performance sumped tank
triple walbro 392
Areomotive FP
DeatschWerks 78 lbs injectors

I wasn't going to do the transmission until this winter but FB was having a sale . There is a few other things going into build like abs delete and batery relocation. Like to hear thoughts and opinions of the building. It's supposed to be done by end of May just got to get my buddy motivated to finish it.

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
Sponsored Links
Advertisement
 
post #2 of 94 Old May 2nd, 2016, 07:23 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Thought I would add some pictures of the old turbo set up and the carnage of the stock block

This is what happens when you ask your buddy to fuel the car on the trailer while you go take a piss and he puts 87 instead of 93 in the tank. Then takes 16 months to fess up.

Few pieces in oil pan


Here is old turbo set up



02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #3 of 94 Old May 31st, 2016, 08:15 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Not much to update
but did get a delivery today can anybody guess whats in the barrel

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
Sponsored Links
Advertisement
 
post #4 of 94 Old June 1st, 2016, 07:00 AM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
Nice to see you getting it done.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5 of 94 Old June 1st, 2016, 02:55 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Quote:
Originally Posted by SSG Pate View Post
Nice to see you getting it done.
I am really at my buddies mercy. He has my car pulled apart to were I cant move it to another shop. I literary have over 15k in parts waiting to be installed. Its not all his fault as I have to take some of the blame.

Freddy Brown has a strange way of shipping transmissions.

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #6 of 94 Old June 17th, 2016, 06:58 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Got a little done this week got the tank pulled. Going to try to get glenns performance tank installed next week and fuel line s run



While the tanks out going to install team z upper and lowers. Also got the transmission almost out. Going to replace it with built FB 4r70w.
Sonic 02 is offline  
post #7 of 94 Old June 17th, 2016, 11:31 PM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
Was you able to get your old fuel canisters out of the old tank?


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #8 of 94 Old June 18th, 2016, 06:06 AM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Are you asking about the evap system ? I haven't pulled it yet but I talked to Glenn yesterday and he told me to use heat gun and lots of WD 40 on it.
he told me one of the pieces is no longer produced and I need to be very careful removing it.

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #9 of 94 Old June 24th, 2016, 06:32 PM
MM Fanatic
 
kyle2002stang!'s Avatar
 
Join Date: Jun 2009
Location: Bowdle, SD
Posts: 4,287
           
iTrader: 3 reviews
that evap stuff is a fucking nightmare if you break the big canister.

---------- Post added at 05:32 PM ---------- Previous post was at 05:30 PM ----------

i really wish somebody would come up with a good aftermarket evap system/tank vent thats easily adaptable to anything.




2002 mustang gt - turbo'd and blown up
1980 mercury zephyr wagon - roller undergoing rust repair
1970 galaxie - 351W cruiser
1978 F150 - 4x4 400M with a few bolt ons
1999 PSD - stock
kyle2002stang! is online now  
post #10 of 94 Old June 24th, 2016, 11:06 PM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
I cut my EVAP out, its a pain in the ass. they don't even make the rubber gasket anymore.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #11 of 94 Old June 25th, 2016, 07:17 AM
D.K
Newbie
 
D.K's Avatar
 
Join Date: Sep 2014
Posts: 18
 
iTrader: 0 reviews
Good luck with your build. Looking at doing a similar CG Fab build in the very near future.

'02 MG GT 2VNA
bolt-ons, [email protected]
busted, shelved, forgotten...until now
D.K is offline  
post #12 of 94 Old June 25th, 2016, 05:59 PM
Still slow.
 
1996 GT's Avatar
 
Join Date: Nov 2010
Location: Canada
Posts: 8,738
                   
iTrader: 1 reviews
Sub'd for this. Looking good!
1996 GT is offline  
post #13 of 94 Old June 26th, 2016, 08:17 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Quote:
Originally Posted by kyle2002stang! View Post
that evap stuff is a fucking nightmare if you break the big canister.

---------- Post added at 05:32 PM ---------- Previous post was at 05:30 PM ----------

i really wish somebody would come up with a good aftermarket evap system/tank vent thats easily adaptable to anything.
You have a Glenn's performance tank? Did you try any of the was Glenn recommends removing them. Just trying to find out if they work or if I'm going to be cussing.

---------- Post added at 08:17 PM ---------- Previous post was at 08:14 PM ----------

Quote:
Originally Posted by 1996 GT View Post
Sub'd for this. Looking good!
Thanks been on vacation and my buddy just left on vacation so not much is getting done the next couple weeks

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #14 of 94 Old June 26th, 2016, 09:50 PM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
The best way to remove them is to cut them out and work your way in cutting it.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #15 of 94 Old June 27th, 2016, 07:35 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Quote:
Originally Posted by SSG Pate View Post
The best way to remove them is to cut them out and work your way in cutting it.
What did you use to cut it out. I would be worried about creating a spark. Definitely wouldn't use the plasma cutter lol.

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #16 of 94 Old June 27th, 2016, 08:38 PM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
Quote:
Originally Posted by Sonic 02 View Post
What did you use to cut it out. I would be worried about creating a spark. Definitely wouldn't use the plasma cutter lol.
I used a angle grinder on one tank I used C02 and the other tank was so old it didn't have any more fuel or fumes in it.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #17 of 94 Old June 28th, 2016, 08:28 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Quote:
Originally Posted by SSG Pate View Post
I used a angle grinder on one tank I used C02 and the other tank was so old it didn't have any more fuel or fumes in it.
Going to try to get them out tomorrow. Going to try wd40 and heat gun and have some heavy duty tin snips as backup. Did you just reuse the old gaskets?

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #18 of 94 Old June 28th, 2016, 10:12 PM
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,558
                     
iTrader: 9 reviews
I couldn't find any new gaskets anywhere.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #19 of 94 Old June 29th, 2016, 06:51 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Tackled the evap system today and it wasn't as bad as I was expecting. Took about 30 min to remove both canister. There is definitely a trick to doing it. First thing is not to try this by yourself or you will break it. It took equal pressure from both sides to get it to raise up high enough until you hit the lip on the canister. When it hit the lip we couldn't get it past it and you are limited to the amount prying up you can do without breaking it. This is were the heat gun and WD40 comes in applied wd40 around the canister and rubber gasket and a little heat to the metal around canister and then applied a little pressure and it popped right out.

Here is new tank with rubber gaskets in.

Here is evap system in the tank

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
post #20 of 94 Old July 5th, 2016, 04:53 PM Thread Starter
Hardcore Enthusiast
 
Join Date: Jul 2013
Posts: 1,314
       
iTrader: 1 reviews
Well got a little more done. Got the transmission out and mounted the pumps on the tank cover.


Next on the list is the install of the the tank , fuel lines and battery relocation. I want to run track legal relocation but I'm looking for ideas of how to run the disconnect out the back of the car. I have seen a few come out though the tail light but don't want to do it that way. If anybody has any suggestions that would be appreciated.

02 roush turbo forged and built
mhs stage 3 heads cms 2.5 turbo cams
CG T6 hot side billet BW S478 with race cover
Dyno numbers coming
Sonic 02 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome