my 1993 notchback project
Posted May 9th, 2008 at 09:39 AM by BWAL
i took delivery of a 1993 4 cylinder notchback last night. it was too good of a deal to turn down. i'm not too sure what i'm gonna do with it yet, but it will definitely be a long term project for me. it has the straightest body i've ever seen on a foxbody. no rust, bondo, nothing. not even a dent. it runs great too and starts on the first try every time. i plan on keeping everybody updated with the progress of the car with this blog. here is the condition i got it in. the fenders, hood, bumpers, quarter windows, and interior are all out of the car, but everything came with it. putting everything back in/on the car will probably be the first thing i do. here are some pics.. don't pay any attention to the current paintjob though. i think whoever previously painted it might have been slightly retarded. i definitely have my work cut out for me...








Total Comments 33
Comments
Page 1 of 2 | 1 | 2 |
-
nice...
Posted May 9th, 2008 at 09:47 AM by thetrooper31 -
Posted May 9th, 2008 at 09:53 AM by TheUNZippee! -
Posted May 9th, 2008 at 09:56 AM by BWAL -
I would highly suggest this, then, Bubba. Formulate a plan. Down to the last detail. Decide what you want the car to be. Come up with a total cost. Think on it. Wait a week or two.
Then, think about it some more.
Make sure you have a definitive plan.
Then, stick to that plan. Or you can wind up like the majority of projects that start out, but never get finished.
Then start saving your money, and complete The Plan.
Posted May 9th, 2008 at 10:04 AM by TheUNZippee! -
Posted May 9th, 2008 at 10:17 AM by BWAL -
is this project finished yet?
Posted May 9th, 2008 at 10:18 AM by nba1341 -
Posted May 9th, 2008 at 10:55 AM by BWAL -
Posted May 9th, 2008 at 08:39 PM by TheUNZippee! -
Posted May 9th, 2008 at 09:23 PM by BWAL -
Posted May 10th, 2008 at 12:22 AM by TheUNZippee! -
Posted May 10th, 2008 at 12:30 AM by BWAL -
Posted May 10th, 2008 at 04:59 PM by luis -
Posted May 10th, 2008 at 05:02 PM by luis -
Posted May 10th, 2008 at 06:19 PM by BWAL -
so what size engine are you gonna drop in that thing?
Posted May 12th, 2008 at 12:06 PM by shadow5403 -
Posted May 12th, 2008 at 02:34 PM by BWAL -
Posted May 12th, 2008 at 10:15 PM by FM1R -
Posted May 12th, 2008 at 11:41 PM by BWAL -
nice looking notch!
Posted May 13th, 2008 at 05:10 PM by Tony_90fox -
Posted May 13th, 2008 at 05:19 PM by DanTheMan
|