need some help with some wires - Forums at Modded Mustangs
 
LinkBack Thread Tools
post #1 of 14 Old June 8th, 2009, 06:43 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
need some help with some wires

these are on the drivers side firewall





these are on the passenger side by the solenoid/battery




what do all the wires go to?

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
Sponsored Links
Advertisement
 
post #2 of 14 Old June 9th, 2009, 07:24 AM
Lost in the 60's
 
MustangOne's Avatar
 
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 2,247
     
iTrader: 0 reviews
The one you are holding is engine guage feed.
and the one by the sol is the voltage reg, and alt feed
MustangOne is offline  
post #3 of 14 Old June 9th, 2009, 11:04 AM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
thanks man! repz fo you.

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
Sponsored Links
Advertisement
 
post #4 of 14 Old June 9th, 2009, 04:00 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
you wouldnt have any pix of them fully hooked up and where they go to? i would really really appreciate it. i bought a 1969 wiring diagram manual but it hasn't come in yet..

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #5 of 14 Old June 10th, 2009, 10:03 AM
Lost in the 60's
 
MustangOne's Avatar
 
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 2,247
     
iTrader: 0 reviews
Let me know if you need anything else. you can use lacquer thinner to clean your wires up.
it is what we do.

Red/green stripe = + coil, White/Red stripe = oil sender Red /white stripe = temp sender



Last edited by MustangOne; June 10th, 2009 at 10:06 AM.
MustangOne is offline  
post #6 of 14 Old June 10th, 2009, 12:42 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
WOW! thanks Mustang1!!! good tip on the wires too i'll have to pick some up

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #7 of 14 Old June 15th, 2009, 10:36 AM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
Well I tried the laquer thinner and worked like a champ! wires hooked up just like the pics and how you suggested. Thanks a bunch!!!

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #8 of 14 Old June 15th, 2009, 01:28 PM
Powered by LSx tears
 
69fastback's Avatar
 
Join Date: Aug 2006
Location: Where the rays of light shine through my Shiner Bock bottle
Posts: 21,408
                     
iTrader: 0 reviews
What is the wire coming off the voltage regulator, that has an eyeball connector on it, but isn't connected to anything for?

I tell the truth. Deal with it.
69fastback is offline  
post #9 of 14 Old June 15th, 2009, 02:13 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
lol dude i have NO idea! i'm still waiting on my wiring diagrams to come in.... i used to have ac so idk if it was to that, plus it sat for 6+ years so all my knowledge went the way of the dodo of where everything went. that's why i'm always asking dumb questions

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #10 of 14 Old June 15th, 2009, 05:30 PM
Powered by LSx tears
 
69fastback's Avatar
 
Join Date: Aug 2006
Location: Where the rays of light shine through my Shiner Bock bottle
Posts: 21,408
                     
iTrader: 0 reviews
I have the same wire. I've just never known what it's for.

I tell the truth. Deal with it.
69fastback is offline  
post #11 of 14 Old June 15th, 2009, 05:45 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
if i'm able to find out i'll let you know.

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #12 of 14 Old June 15th, 2009, 05:50 PM
Lost in the 60's
 
MustangOne's Avatar
 
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 2,247
     
iTrader: 0 reviews
MustangOne is offline  
post #13 of 14 Old June 15th, 2009, 05:58 PM Thread Starter
I'm Hella From Nor*Cal
 
707Stang's Avatar
 
Join Date: Jan 2007
Location: Denver, CO...
Posts: 1,166
     
iTrader: 0 reviews
Thanks!

The Curse: 570 Holley, JBA shortys, Pertronix billet dizzy, Accel coil, 5.0 h.o, dynomax exhaust, SSBC, MSD, FRPP, currie....
707Stang is offline  
post #14 of 14 Old June 25th, 2009, 10:41 PM
Regular
 
Hunter7158's Avatar
 
Join Date: Oct 2008
Location: Maryland
Posts: 73
 
iTrader: 0 reviews
M1 knows his stuff

2014 Mustang GT with CJ Setup
1967 Mustang Coupe Restomod Project
Hunter7158 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome