Made the second order or at least part of it!
Wednesday is when everything is suppose to come in:
Ford "C" springs w/rear isos
MM CC Plates
Silverstars as the new headlights (Smoked lenses really are a biotch at night)
Also to keep me pre occupied today while I wait for the stang to finally have Lowering springs I started to realize how much I dislike my Single Din Headunit. I currently am running a Kenwood Excelon KDC-X7479 like this:
I have it wired with iPod and USB hookups through the glove box. Don't get me wrong the Unit itself is great but the little Shelf/storage place above the Headunit drives me crazy. Its too small for anything useful and if you put anything small in there your hand is too big to get it out. Maybe I'm the only one with this problem
So i figured i'd see what i could fab up to cover or make the space more appealing.
I decided to create a cover to place over the hole with some sort of Mustang/ Writing on it so that when an LED was turned on it would shine through and look appealing. Heres the current practice run.
Went to the home depot grabbed some pasti dipp and plexiglass sheets:
Then found some cardboard and made sure of some fitments.
Then I created a stencil to block the area I want Transparent for light to shine through:
(Simply made from paper and tapped on to the plexi)
Sprayed with a solid coat of plasti dipp and BAM.
There are two types of possible covers:
Create a cover that cover the entire storage space
Create a cover that fills in the storage space instead of covering it.
I plan on making a better stencil one with less transparent area tomorrow.
I'll also snap some pictures of the install and the "Storage Space" in the morning.