I orderd in.
meguiars m105, and m205
PB black hole glaze
wolf gang deep gloss paint sealent
PB battys blue paste
I'm going to go pick up pads, towels locally and use the polisher from work.
Looks ok on the list for starting. However, you need Microfiber Cleaner, Some form of cleaner for the pads (XMT combo), a good wash mitt, waffle weve drying towels, and some foam applicators. You also need to start using the two bucket method if you want to keep swirls off.
I have never used the Wolfgang Sealant, but I can tell you theres much better out there. Should of went with the Blackfire Wet Diamond or CG Jetseal. Both are pricey but with this hobby, you get what you pay for.
Where are you getting microfiber localy? MOST Microfiber is bad unless you order it from am online source. Do NOT NOT NOT buy MF from a parts store or walmart... no matter how much you polish you will still scratch it up with bad MF.
Would a random orbital work? We have a 10inch one here at home.. I am not sure yet on what color pads. I was gonna pick up 1 of each or whatever.
Yes, you want a random orbital.... BUT a 10in knock off will not work. If you REALLY want to do this right, but a good DA/Random Oribital polisher from autogeek or detailed image.
For the basic pad selection...
One of each will never work for a correction job. The blue/red pads are rarely used unless you care to wax by machine.
I personally use 5" pads, so you would need a 5.5" backing plate. I have not used the larger 6" pads yet.