Forums at Modded Mustangs - View Profile: SSG Pate
                     

SSG Pate SSG Pate is offline

Moderator

  Visitor Messages

Showing Visitor Messages 1 to 10 of 16
  1. sharkbait2
    June 27th, 2016 02:45 PM - permalink
    sharkbait2
    Hey man its Aaron @ JPC.

    Who do i need to contact about changing my account to a new email. My old email is no longer around and I can't access my account now that they changed all the passwords.

    Thanks for the help
  2. Venomous
    January 13th, 2016 03:12 PM - permalink
    Venomous
    Good Morning Cali Time SSG Pate

    Name is Jose, Im pulling motor out of my 01 GT, swapping for another 2v. Question I had and recall seeing in one of your pictures on Photobucket was you pulling motor/tranny combo.

    I remember seeing in the picture that you pulled the combo on the last slot on the engine hoist. The picture looked like it was at 1/4 ton slot, I was concerned of pulling combo on the 1/4 slot because of the weight of both combo.

    Should I be good?
  3. stal94gt
    February 20th, 2015 11:15 PM - permalink
    stal94gt
    hey pate once your done with your trans you need to hook me up with a parts list for a good reliable 4r setup. i get back to the us in may so i will be doing an auto this time
  4. YOUNG-GUN
    June 30th, 2013 05:32 PM - permalink
    YOUNG-GUN
    Hey Pate i wanted to thank you for all the help. Especially the intercooler piping, i was afraid of doing it but after your help i got some motivation and did it myself. It was easy like you said, probably the easiest part of my whole build. Now if only i could actually drive my car haha.
  5. DGS2vGT
    June 4th, 2013 12:14 AM - permalink
    DGS2vGT
    hey, how come your name is in White?
  6. woodrow5.0
    February 27th, 2013 12:50 PM - permalink
    woodrow5.0
    hahahaha
  7. SSG Pate
    January 19th, 2013 08:45 PM - permalink
    SSG Pate

  8. SSG Pate
    January 19th, 2013 08:44 PM - permalink
    SSG Pate
  9. YOUNG-GUN
    November 24th, 2012 01:21 AM - permalink
    YOUNG-GUN
    Its been going good so far. I just ordered the intercooler from cx racing, i called Kurgan Motorsports to order the maf but Bob was out because of the holidays. I should have all the parts ordered by monday. Cant wait haha.
  10. thechris90
    July 4th, 2012 01:16 AM - permalink
    thechris90
    is this what you ment by PM you? sorry kinda new to MM

  About Me

  • About SSG Pate
    Vehicle
    00 Mustang GT Vert/88 5.0
    Location
    Tennessee
    Interests
    Family/ Mustang/ Harley
    Occupation
    Engineer Supervisor
    Biography
    I am an Engineer for the Dept Of the Army where I have been for the last 17 years.
  • Signature

    Convertible Crew Founder
    Proud Iraq and Afghanistan War veteran

    700 RWHP Club Member #1

    Vortech T Trim @18 PSI
    604 RWHP 516 FT LB
    [email protected]@ 523RWHP

    Precision Turbo 7675 CEA @ 20 PSI
    738 RWHP 691 FT LB
    10.9 @ 131 MPH

  Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: November 25th, 2019 11:55 PM
  • Join Date: September 12th, 2010
  • Referrals: 2

  Friends

Showing Friends 1 to 10 of 24

  Mentions

April 13th, 2016
12:23 PM - AMAlexLazarus mentioned SSG Pate in post Item #101039G94
SSG Pate Sorry about the del...

  Quotes

November 25th, 2019
12:19 PM - SSG Pate quoted White03GTanger in post Custom turbo set up
Twin 6765 .68a/r Hey man hows th...
12:13 PM - SSG Pate quoted 1C2 in post The Turbo Build Has Begun
Beautiful car man! Th...
September 24th, 2019
09:42 AM - 03_Vortech_GT_Vert quoted SSG Pate in post Degreeing 2v Cams; and Question about Cam Selection
Everything you need to know r...
August 7th, 2019
11:05 PM - Snorky quoted SSG Pate in post The never ending 2v TURBO BUILD
Post some pictures when you g...
August 5th, 2019
06:34 PM - lowboost2v quoted SSG Pate in post The Turbo Build Has Begun
I almost went with a holley b...
06:32 PM - lowboost2v quoted SSG Pate in post The never ending 2v TURBO BUILD
Post some pictures when you g...
August 4th, 2019
11:37 PM - SSG Pate quoted lowboost2v in post The never ending 2v TURBO BUILD
There is definitely some regret...
11:24 PM - SSG Pate quoted lowboost2v in post The Turbo Build Has Begun
Anxious for some pull videos. ...
August 2nd, 2019
11:01 PM - SSG Pate quoted zigbigadoru in post Engine Binding
So it was for sure the transmiss...
10:59 PM - SSG Pate quoted lowboost2v in post The never ending 2v TURBO BUILD
It's not lol Well since the ...
10:57 PM - SSG Pate quoted lowboost2v in post The Turbo Build Has Begun
Oh I'm doing ok sir and yoursel...
01:05 PM - lowboost2v quoted SSG Pate in post The Turbo Build Has Begun
Hey Scottt been wondering how...
01:04 PM - lowboost2v quoted SSG Pate in post The never ending 2v TURBO BUILD
when you going to get this ru...
12:37 PM - SSG Pate quoted lowboost2v in post The Turbo Build Has Begun
Are you running your stock ECU ...
May 26th, 2019
11:30 AM - 01Bullitt82 quoted SSG Pate in post Return Fuel Sytem Routing Question
dead head is the way to go id...
April 22nd, 2019
12:01 PM - CYAL8R quoted SSG Pate in post Catalytic Converter options
You have emissions in your St...
April 21st, 2019
11:54 PM - SSG Pate quoted Snorky in post The Turbo Build Has Begun
Walbro 465? TI Automotiv...
11:51 PM - Snorky quoted SSG Pate in post The Turbo Build Has Begun
Nice to see that this builds ...
06:21 PM - SSG Pate quoted jstang909 in post The Turbo Build Has Begun
Nice to see that this builds s...
April 8th, 2019
10:34 PM - SSG Pate quoted EDDIEDOVER in post Mmr 4.75
I Know this is an old thread bu...

  iTrader

iTrader Profile Recent Ratings
iTrader:
Positive Feedback:
9
100.0%
Members who left positive:
Members who left negative:
9
0
Total positive feedback: 13
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0

  Reputation

  Thread Date Comment
2019 Fuel System... December 6th, 2019 12:13 AM It's your lucky day. I need to neg someone.
Looking for your... July 25th, 2018 09:04 PM thanks for the advise
I seem to be leaking... December 31st, 2017 03:27 PM Great resource for help
No start on new... January 13th, 2017 08:32 AM Help with no Start issue
Dropped valve changing... May 18th, 2016 09:29 AM Thanks!
Dropped valve changing... May 16th, 2016 12:18 PM Thanks for the help!
triple pillar gauge pod... January 7th, 2016 12:07 PM Positive comments!
am I missing anything??... December 8th, 2015 02:46 PM Thank you for the info regarding my fuel setup, definately made me feel much more confident in the setup. I really appreciate all the help!
AC compressor clutch August 29th, 2015 03:26 PM Thanks for your help!
Yes, another turbo... June 24th, 2015 10:40 AM Helping me with PPRV questions!
Help a friend out. May 18th, 2015 11:55 PM Thanks!
balancer removal May 17th, 2015 09:21 PM good info
I need advice on oil... March 29th, 2015 11:53 PM Very Helpful
Bullitt 5381 build March 28th, 2015 07:48 PM Thanks!
deleting the coolant... March 1st, 2015 11:15 PM good info
Possible fuel leak? February 22nd, 2015 12:17 AM Thanks
99 GT Vert Build Thread January 30th, 2015 01:45 AM great info!
How to change rear main... January 18th, 2015 01:36 PM thanks for the help
ditch centri for turbo?... December 14th, 2014 02:14 PM thanks for the info.
MM's 2014 Holiday care... December 3rd, 2014 07:25 PM
Gear backlash question November 20th, 2014 11:40 PM Thanks for all your help
The Turbo Build Has Begun November 13th, 2014 11:15 PM Thanks for your service
American Muscle's tag... November 4th, 2014 05:38 AM Yup
Even an Idiot Can Build... October 21st, 2014 01:12 AM Gold!
2832 point(s) total
 
For the best viewing experience please update your browser to Google Chrome