|Topic Review (Newest First)|
|March 8th, 2015 10:24 AM|
|J Persons||Why not use the brackets from a Fox Mustang on the Ford Racing 302? They are cheap and OEM quality.|
|February 23rd, 2015 10:47 PM|
|460brevill||At least you have something to choose from. I am having to make a setup for my I-6.|
|February 19th, 2015 01:46 PM|
|rittenrotton||makes sense! Thank you for the explanation, appreciate it!!|
|February 19th, 2015 10:04 AM|
|ajzride||To elaborate... with a traditional V-Belt setup the belt comes across the top of the pulley moving right to left, and turns it counterclockwise. On a S-Belt setup, it comes across the bottom of the pulley moving right to left and turns it clockwise.|
|February 19th, 2015 09:33 AM|
|TCStang||It's because the the direction that the belt spins the water pump. If you use a standard rotation it would be going backwards.|
|February 19th, 2015 09:13 AM|
|rittenrotton||Thank you for your help! just out of curiosity, why would I need to use a a reverse rotation water pump?|
|February 12th, 2015 09:07 AM|
Looks like you would need to use the March compressor P410:
Accesories Water Pumps and A/C
Also note the asterisks:
You must use an electric fuel pump
You must use a reverse rotation water pump
You must use a 90* thermostat housing.
And based on the way it is setup, you probably will have to run an electric fan. I can't see most fan clutches working with the water pump pulley.
|February 11th, 2015 03:51 PM|
Thanks for your help! Do you have a recommendation for which pulley to get or will any aftermarket compressor work?
Here is the link for the march kit...
March Performance 30140 Mustang Serpentine Kit 302
|February 10th, 2015 05:28 PM|
I don't know why you couldn't use another kit. Perhaps there is something about the CAA compressor that will prevent you from using an aftermarket pulley, but you could always swap out the compressor.
However I have never seen a March kit that cheap, so I am wondering if you are looking at what you really need.
|February 10th, 2015 03:15 PM|
Serpentine Pulley and Bracket Kit
I have a new ford racing crate 302 with classic auto air aftermarket kit on it. I was looking to convert it to a serpentine belt system and was advised by Classic Auto Air that I can only use their Serpentine Accessory Drive Kit (costing $2,704.99). Is that true or can I use any other brand like March Performance ($745.99)?