|Topic Review (Newest First)|
|February 11th, 2016 12:25 AM|
|February 10th, 2016 07:22 PM|
|Edgethis||Awesome, is it a roller block?|
|February 10th, 2016 04:03 PM|
It's not going to be built anytime soon thats for sure. But couldn't pass up a good condition 351W block for $120. It's been bored 40 over and has been sonic tested and would have no problem going 60 over. So that's exactly what I plan to do with it. Going to start slowly piecing together parts for it and eventually get a nicely built 351 done. Also had my carpet come in the mail that I ordered.
|January 28th, 2016 02:06 AM|
Not a whole lot has happened. However I finally got my back ordered parts in the mail and have already put them one.
First is the dash bezel and lenses.
It is a night and day difference over my old worn out assembly. Was a pain to do though considering my wires were a little stuck and I couldn't pull the dash far enough out to disconnect them. I had to disconnect everything from the small space behind the heater controls.
Next is a crappy cell phone picture for now. And my engine bay looks completely terrible :
I'm still periodically trying to find a motor. But keep tossing around different ideas.
And then hopefully here soon i'll be able to buy my welder and tackle the floor pan and sub frame connectors and then from there will be near carpet and eventually replacing my gas pedal. Also need to go over my brakes and fix the leak that is going on.
|December 27th, 2015 02:34 PM|
|December 27th, 2015 12:21 PM|
Darn, i just looked and theres no LKQs up there. I really like the one here, it costs $2 to get in, good all day. There prices are all on teh website so I know what to expect beforehand.
Auto Parts Prices | LKQ Pick Your Part | LKQ Pick Your Part - Austin
They also keep an inventory of what vehicles are in the yard, its updated about every week.
Vehicle Inventory, Auto Parts | LKQ Pick Your Part | LKQ Pick Your Part - Austin
|December 27th, 2015 02:37 AM|
|December 26th, 2015 06:50 PM|
Glad to see some more progress! Where in TX are you? The LKQ pick a part here in Austin is having a 40% sale next weekend. You can get a 351w out of either a van for roller cam or theres actually a 71 Galaxie with an older 351w. I'd gladly help you pull it if you're around. I nabbed one awhile back for about 150 (without core), this time I have an old 302 block for a core, I'm aiming to get another 351w short block for about $85.
Theres also a handful of mountineers with gt40 heads too.
|December 26th, 2015 03:02 PM|
Holy crap I just realized I had made a build thread. I was going to start one and then found this one. Sadly not a whole lot has happened since this has last been updated. Mainly just replacement parts or maintenance on my Roush. However I did get a lot of car parts for christmas (Most of which were presents to myself from me haha). I had even considered selling the Roush to put more time and money into this one. But as it sits this is the upcoming projects I have for it.
Also have a monte carlo bar and the new gauge bezel coming in, those were on back order. Then need to go pick up a welder as well for the floor pans and I bought sub frame connectors that aren't in the picture.
I plan to try and cut the valence to have the r style to it. I wasn't wanting to buy it in fiberglass so figured i'd try it with this one.
Then was bored one night and couldn't sleep so I started removing the a/c compressor and components since it's had a leak and hasn't worked in years anyways. Also putting new valve cover gaskets and fixing a lifter issue. Just haven't pulled out the dash unit yet
Also a few months ago the car started to have some really bad steering problems and badly needed and alignment. However it was all wore out and CJPonyParts was having a big sale so I got a really good deal on almost all the entire front suspension.
Car still looks the exact same for now though
This will stay a slow build i'm sure but i'm trying to buy more for it more often and will try to keep this updated more frequent. I'm also trying to track down a decent priced 351W. But it's not at the very top of the list of work right now. Just if I happen to find a good deal on one.
|April 13th, 2012 11:46 PM|
|Blue67coupe||Thanks guys was an awesome event and I look forward to going back if I can.|
|April 13th, 2012 10:14 PM|
|Edgethis||Thats awesome to get to meet Jack Roush and get your car signed!|
|April 13th, 2012 09:22 PM|
|Dereks197||That's pretty badass man!! Nice rides btw, i'm kinda jealous right now heh heh|
|April 13th, 2012 06:56 PM|
Just got back from the Joe Myer's Ford Jack Roush appearance.
Got mine and mom's tool box and passenger side air bag signed
In mom's 01:
Signing the tool box
Got mom's shirt signed, mine and my cousins models and two posters. Well all bought shirts there as well. And I got a cheap vanity plate
The rest of the pictures can be seen here
|April 10th, 2012 08:14 AM|
|Edgethis||That is a sweet looking Roush! The 67 still looks great too.|
|April 10th, 2012 02:01 AM|
Originally Posted by B's04gt View Post
Originally Posted by BA Mustang View Post
|April 10th, 2012 01:55 AM|
|BA Mustang||Yeah Roush is my favorite with Saleen right behind it.|
|April 10th, 2012 01:55 AM|
|B's04gt||Sexy roush man!|
|April 10th, 2012 01:34 AM|
|Blue67coupe||Thanks, the Roush kit is actually my favorite. I paid $9,500 for this one. Mainly because KBB said a base GT would average around $8,200 and in my area they are still pretty much all around that price. So for a base and then to add on the bodykit, paint for the bodykit, the suspension, and interior would easily run me 4K over this one. And considering I could get a real Roush cheaper than to try and build a clone of some sort I jumped on it.|
|April 10th, 2012 01:31 AM|
|BA Mustang||I almost bought a red Stage 2, just didn't want to spend $10,900. Kinda wish I did now Love the look of Roush.|
|April 10th, 2012 01:15 AM|
Thought I would update to say progress on the 67 is basically done for quite a while.
But here is a most recent picture
And this is where most of my money shall go now
Purchased (4/5/12) It's a 2003 Stage 2 Roush
Had it not even a full two days and decided to paint the grille for contrast
Playing around with photobucket editing
Full Roush interior with the comfiest seats i've ever sat in
Had some fun in a couple tunnels on the way home
Order the ROUSH letters for the windshield and the rear glass. Ordered them in matte black for a subtle stealth look. And eventually plan on going to the Roush spoiler but I like the Cobra one for now.
|This thread has more than 20 replies. Click here to review the whole thread.|