|Topic Review (Newest First)|
|June 6th, 2018 06:28 AM|
|Bullitt95||Yo no hablo espaņol. :|
|June 4th, 2018 06:38 PM|
Originally Posted by Bullitt95 View Post
|June 2nd, 2018 11:04 AM|
Originally Posted by 07 Boss View Post
|June 2nd, 2018 04:55 AM|
Well it’s evens older now. But I’m bored.
You put the trans in your car. Any 1/8th decent tuner can tune your stock wiring harness and pcm to run the manual transmission. If they claim it’s difficult, ditch them
immediately because they’re stupid and should not be touching a vehicle.
|May 15th, 2018 04:53 PM|
|freeloader||I know the post is old but anyhow, you'll need a standard ECM for your 2006. You don't need any wiring from the 2008 donor car. You can mod the 2006 automatic harness to work with the standard.|
|February 24th, 2018 04:53 PM|
|g150rdt||If they don't know the answer to those questions, i wouldn't let them work in my car.|
|February 24th, 2018 01:09 PM|
|07 Boss||I thought they changed the language or programming from 2007 on up.|
|February 23rd, 2018 08:02 PM|
|stangmoz||I have to take them the parts- yep. that is what I am doing.|
|February 23rd, 2018 07:09 PM|
|faym 08||: your on a Mustang forum asking swap questions but a shop is doing the swap.|
|February 23rd, 2018 05:34 PM|
Hey Everyone, I am new to MM and an hoping you can help me with my project.
I am swapping my Auto Trans from my 2006 GT to a Manual. I've already purchased a manual tranny from a 2008 GT.
can you advise if a 2008 ECU and 2008 wire harness will be compatible with my 2006 4.6 3v motor?
also, if you might know code for ECU i need.
Thank you and if you have any other suggestions & pointers I'd appreciate it.
A shop is doing my swap.