Forums at Modded Mustangs - Reply to Topic
Thread: Mustang Tech Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
March 31st, 2012 03:14 AM
Mustang Tech

problem with my 89 5.0 12:30 bored over E303 cam I just put a turbo on it and the injector 42 pounds with a 255lph fuel pump .. 65 mm throtle body edlebrock proformer 5.0 intake .. I'm having trouble keeping the running .. I need it to work so I can take to get a decent song .. have a9l etc in it .. would be helpful appritiate
July 11th, 2011 04:38 PM
usrangers84 looking for a alternator write up and can find anything.
June 22nd, 2011 08:40 PM
89tbobox having trouble with my 89 5.0 bored .30 over e303 cam i just put a turbo on it and 42lb injectors with a 255lph fuel pump.. 65mm throtle body edlebrock proformer 5.0 intake.. i am having trouble keeping it running.. i need to get it to run decent so i can take it to get tuned.. it has the a9l ecc in it.. would greatly appritiate some help
April 24th, 2011 08:43 PM
Kyle bethel Hey I have a 1988 mustang with the 5.0 ho and have some work
Done to it and I'm wondering what u should be looking at as
Far as power. I have the stock heads and intakes and lower end
But it has freshened up cylinders new bearings rings etc
Along with a f303 cam I believe it's a very rough idle cam
The ford racing 1.6 roller rockers hydrollic roller lifters a 70mm
Tb and a 1 inch lower intake spacer. It has headman long tube
Headers and a straight through exhaust. However it only has
110 miles on the rebuild so I feel it's not yet broken in yet
But any guesses on whp?
April 24th, 2011 08:37 PM
Kyle bethel Hey I'm knew to this forum thing so if anyone can
Give me a hand with it I would greatly appreciate it.
June 28th, 2010 12:50 PM
SeanT55 i'm having trouble with my tail lights...they're not turning on
January 28th, 2010 10:52 AM
Mr. Red Pony
Need Spark plug help.

Im having a little trouble with my stang. I put new spark plug wires in it, and now my first bank is running wrong. Im not sure why. all the wires are in the right place. Does anyone have a -good- wiring diagram for a 3.8 with which wire goes to which cylinder?

I would greatly appreciate it.
November 20th, 2009 06:59 AM
brocklancer mustang technology group was founded in 1999 by partners with extensive defense industry experience from both texas instruments defense systems and electronics group and raytheon.
February 10th, 2008 01:25 PM
Jeff1970 Is their a way to reset my anti theft alarm system?
February 10th, 2008 01:23 PM
Jeff1970 How do I disable my anti theft alarm system in my 1996 mustang cobra?
February 9th, 2008 03:01 PM
Jeff1970 I have a 1996 Cobra Mustang,the starter clicks. I have checked the battery, replaced the starter and had it bench tested. I checked the starter relay ire thats close to the battery, I took battery cables and jumped them down to the ignition module under the dash.Could it be my anti theft alarm or my clutch pedal position switch??
December 17th, 2007 04:06 PM
Mustang Tech

Mustang FAQ - Engine Tech, Air Bag, ABS, Brake Home Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

For the best viewing experience please update your browser to Google Chrome