|Topic Review (Newest First)|
|May 25th, 2019 07:01 AM|
|May 24th, 2019 08:41 PM|
|5.0 maniac||10.5 on rear. With 95 rear end lower control arm reversed quad shock rolled fenders. 10.5 deep dish bullit 285 tires. Eibach lowering springs|
|July 4th, 2018 06:41 PM|
275/4517 on 10 inch wide wheel on my 93LX no problem. I did have to remove the Quad shock other than that easy going. Chris at LMR very helpful. Papa Doc
|July 17th, 2007 05:26 PM|
|baine21225||just tub it|
|July 17th, 2007 12:55 PM|
|BCR93stang||What is the quad shocks?|
|June 21st, 2007 11:09 PM|
Originally Posted by SDHW44
|June 21st, 2007 09:11 PM|
I stand corrected. Great looking car! What did it take to get em under there?
Again , pardon my ignorance
|June 21st, 2007 07:00 PM|
Originally Posted by 89StangGT
|June 21st, 2007 06:56 PM|
Originally Posted by Mikie
|June 21st, 2007 10:56 AM|
Originally Posted by jtillery
No rubbing at all.
Now I agree that 17x10.5 with a 315 would just be out of the question. I have never tried it , but it does not seem feesable to me.
|June 21st, 2007 10:22 AM|
what is up ya'll? i am new to this forum and kinda new to mustangs. i have a 89gt with TFTW heads, TRF stage II cam, performerII intake, roller rockers, 3.73 gears, etc. i am now dressing the car up with paint , wheels, tint, etc. i was wondering what in the world can i do to make 17x9in fit on my stang? on that note...what is rolling fenders, is it really necessary to change upper and lower control arms? what will actually rub, the rim or the tire.
|April 24th, 2007 11:40 AM|
|jtillery||I am assuming you are talking about putting a 17 x 10.5" wheel... It is not as easy as they are making it sound. When I first started my project, I bought some 5 lug 10.5" wheels with a 275 rear tire. I did some test fitting, and abanoned the idea. It will require major mods to get a 275 rear and a 10.5" tire, let alone the 315 rear tire that should really be on there. Do a search, I went into more detail in other threads. Bottom line, is you are much better off running a 17x9 wheel with a 275 tire. That still requires mods, you need to run aftermarket upper and lower control arms so you can remove the quad shock, and is some cases you may need to roll the fender lip. It looks real nice though, fills the fender out perfectly.|
|April 24th, 2007 11:32 AM|
|patwrecked||what about rear struts and exhaust pipes. i have stock 15x7 10 holes and they rub the struts when i corner really hard, how the fuck are you gonna get 10s in let alone 10.5.|
|April 24th, 2007 08:01 AM|
|stang94||10.5 on Fox I think you DO need to roll back the fenders. But to answer you question. Yes it does it. it just will take alittle work.|
|April 24th, 2007 07:33 AM|
|Lax89||10.5's will fit....it just takes some maneuvering to get them on there, actually alot of maneuvering and jamming, and hammering and whatnot. Anyways....they do fit, A friend got them on there, and I'm sure a few people will back me up here. Anything bigger needs the fenders rolled and whatnot....but if ur careful and try really hard, u can squeeze em in|
|April 23rd, 2007 08:50 PM|
I think they will fit, only thing you will have to do is convert over to 5 lug if they are 5 lug.
otherwise I think the 10.5 fit.
|April 23rd, 2007 06:02 PM|
|TurboLX||https://www.moddedmustangs.com/bmrs-q...5-mustang.html hope that helps|
|April 23rd, 2007 05:58 PM|
|TurboLX||well that is gonna be expensive and a lot of time and effort, hold on i saw an article about this,|
|April 23rd, 2007 05:51 PM|
10.5" Wheels on Rear of 89 Mustang, How Can I Do It?
I looking for someone who has gone through the process of putting a Set of 10.5" wheels on the back of a 87 - 93 (specifically a 89) Fox body Mustang. I need to know what suspension and body mods I will have to perform to make this happen and it is going to happen. Thanks for any and all info you can give. Mustangs for Life, Dude.