|Topic Review (Newest First)|
|March 31st, 2012 03:14 AM|
problem with my 89 5.0 12:30 bored over E303 cam I just put a turbo on it and the injector 42 pounds with a 255lph fuel pump .. 65 mm throtle body edlebrock proformer 5.0 intake .. I'm having trouble keeping the running .. I need it to work so I can take to get a decent song .. have a9l etc in it .. would be helpful appritiate
|July 11th, 2011 04:38 PM|
|usrangers84||looking for a alternator write up and can find anything.|
|June 22nd, 2011 08:40 PM|
|89tbobox||having trouble with my 89 5.0 bored .30 over e303 cam i just put a turbo on it and 42lb injectors with a 255lph fuel pump.. 65mm throtle body edlebrock proformer 5.0 intake.. i am having trouble keeping it running.. i need to get it to run decent so i can take it to get tuned.. it has the a9l ecc in it.. would greatly appritiate some help|
|April 24th, 2011 08:43 PM|
Hey I have a 1988 mustang with the 5.0 ho and have some work
Done to it and I'm wondering what u should be looking at as
Far as power. I have the stock heads and intakes and lower end
But it has freshened up cylinders new bearings rings etc
Along with a f303 cam I believe it's a very rough idle cam
The ford racing 1.6 roller rockers hydrollic roller lifters a 70mm
Tb and a 1 inch lower intake spacer. It has headman long tube
Headers and a straight through exhaust. However it only has
110 miles on the rebuild so I feel it's not yet broken in yet
But any guesses on whp?
|April 24th, 2011 08:37 PM|
Hey I'm knew to this forum thing so if anyone can
Give me a hand with it I would greatly appreciate it.
|June 28th, 2010 12:50 PM|
|SeanT55||i'm having trouble with my tail lights...they're not turning on|
|January 28th, 2010 10:52 AM|
|Mr. Red Pony||
Need Spark plug help.
Im having a little trouble with my stang. I put new spark plug wires in it, and now my first bank is running wrong. Im not sure why. all the wires are in the right place. Does anyone have a -good- wiring diagram for a 3.8 with which wire goes to which cylinder?
I would greatly appreciate it.
|November 20th, 2009 06:59 AM|
|brocklancer||mustang technology group was founded in 1999 by partners with extensive defense industry experience from both texas instruments defense systems and electronics group and raytheon.|
|February 10th, 2008 01:25 PM|
|Jeff1970||Is their a way to reset my anti theft alarm system?|
|February 10th, 2008 01:23 PM|
|Jeff1970||How do I disable my anti theft alarm system in my 1996 mustang cobra?|
|February 9th, 2008 03:01 PM|
|Jeff1970||I have a 1996 Cobra Mustang,the starter clicks. I have checked the battery, replaced the starter and had it bench tested. I checked the starter relay ire thats close to the battery, I took battery cables and jumped them down to the ignition module under the dash.Could it be my anti theft alarm or my clutch pedal position switch??|
|December 17th, 2007 04:06 PM|
Mustang FAQ - Engine Tech, Air Bag, ABS, Brake Home Page