Exedy clutch is Looking for Mustang V6 2005-2010 for prototype clutch test fit
We are currently developing replacement clutch and solid mass flywheel for the 2005-2010 V6 Ford Mustang.
We now are at the stage where we need a vehicle to test fit the flywheel and clutch kit. What we have at this time is a stage 1 organic clutch kit with a solid mass replacement flywheel(22lbs). This set up is good for 307 Ft./Lb.(25% safety factor and a 20% assumed drive-line loss) Torque at the wheel or 383 ft./lb. of torque at the flywheel ( 480 ft./lb of torque at the flywheel with no safety factor).
Exedy will cover the installation cost ( AllData labor times will be used ) from a workshop of the owners choice. The clutch must be installed in a professional automotive repair facility. An Exedy representative will be present during the installation and may want to test drive the vehicle after the installation is complete.
For more detail please contact me via PM
Last edited by Exedy; January 10th, 2013 at 04:03 PM.
Reason: added more torque values