Forums at Modded Mustangs

Forums at Modded Mustangs (https://www.moddedmustangs.com/forums/)
-   V6 Mustangs (https://www.moddedmustangs.com/forums/v6-mustangs/)
-   -   In the middle of my long tube install help (https://www.moddedmustangs.com/forums/v6-mustangs/289378-middle-my-long-tube-install-help.html)

Neilarango January 10th, 2013 06:32 PM

In the middle of my long tube install help
 
In the middle of my long tube install on my six i got all the bolts out on the passenger side off two on the driver side i cant remove the header to midpipe bolts off any suggestions or tips.:computer:

Durr4456 January 10th, 2013 06:35 PM

Pb blaster.


Sent from my iPhone using AutoGuide.com App

Neilarango January 10th, 2013 06:38 PM

whats that? lol is it like wd 40?

gaetz1985 January 10th, 2013 06:42 PM

Quote:

Originally Posted by Durr4456 (Post 4996845)
Pb blaster.


Sent from my iPhone using AutoGuide.com App

Yeap

Neilarango January 10th, 2013 06:48 PM

well ill pick some up tomorrow to help out. thanks guys

bigjohnstud4200 January 10th, 2013 06:49 PM

Quote:

Originally Posted by Neilarango (Post 4996852)
whats that? lol is it like wd 40?

Like WD40 x10. I usually use gloves with that shit, it stinks and stays with you.

SlowSix January 10th, 2013 06:49 PM

pb blaster and a wrench...if you can fit a piece of something over it to use as a breaker that will help.
I know there isn't much room in there though

Neilarango January 10th, 2013 06:51 PM

NO spacee its sucks i gave up on the midpipe completely i got a prochamber so im thinking i could take of the headers and midpipe together correct me if im wrong

Fink January 10th, 2013 06:55 PM

Pb blaster or wd40, 1/2" drive breaker bar + extensions + socket.

Sent from my droid using my fingers.

02edge January 10th, 2013 07:01 PM

grinder

Fink January 10th, 2013 07:18 PM

Quote:

Originally Posted by Neilarango (Post 4996888)
NO spacee its sucks i gave up on the midpipe completely i got a prochamber so im thinking i could take of the headers and midpipe together correct me if im wrong

Cant be done. do what i said.

If that doesnt work, do you have an oxy/acetylene torch or someone that can bring theirs to you? Heat the nuts till they are cherry red and crack them loose.

Sent from my droid using my fingers.

Neilarango January 10th, 2013 07:25 PM

im planning on swapping my whole exaust how would I take out my midd pipe then

Fink January 10th, 2013 07:32 PM

1/2" drive breaker bar, 1-1.5' of extensions, wobble + deep socket or a deep swivel socket. and a lot of muscle

Or an impact.

Sent from my droid using my fingers.

Filly January 10th, 2013 07:35 PM

Preferably get a long extension so you are able to get a toque wrench on it then you just need to have another person hold the extension so it doesn't slip off or use your other hand.



Or drink some muscle milk, shed the tang, grow a pair, and get it off with a socket driver.

Sent from my iPhone using AutoGuide.com App

gaetz1985 January 10th, 2013 08:12 PM

Quote:

Originally Posted by Filly (Post 4997000)
Preferably get a long extension so you are able to get a toque wrench on it then you just need to have another person hold the extension so it doesn't slip off or use your other hand.



Or drink some muscle milk, shed the tang, grow a pair, and get it off with a socket driver.

Sent from my iPhone using AutoGuide.com App

This is how I done..by myself of course.. Gotta put the ol purse away and put some man into it! Lol JK.. Good luck hope you get it..

condor123 January 10th, 2013 08:51 PM

roids

Green_6er January 10th, 2013 08:59 PM

muscle that bitch off. my car had 130k and i got mine off. good luck on the passenger side install though ;)

Fink January 10th, 2013 09:16 PM

Quote:

Originally Posted by Green_6er (Post 4997338)
muscle that bitch off. my car had 130k and i got mine off. good luck on the passenger side install though ;)

My driver side was a PITA to install. Passenger was a breeze, but i deleted the EGR.

Sent from my droid using my fingers.

Green_6er January 10th, 2013 10:12 PM

EGR is the bitch lol. I had to cut down a 27mm (i think?) to get it tight. and i had to lift the motor to get the passenger side in, but then again i did it on jackstands lol.

Filly January 10th, 2013 10:15 PM

Both sides for me lined right up but the drivers side was a bitch to get the bolts in


Sent from my iPhone using AutoGuide.com App


All times are GMT -4. The time now is 04:15 AM.

powered by vBulletin ©2000 - 2019, Jelsoft Ent. Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome