Modded Mustang Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Ok guys just got a axel back and decided to have it put on, I have been to two different places and both the same problem the muffler looks off. I bought the aftermarket hanger kit from AM and both places said that it wouldn't make a difference and didnt put it on. Heres what it looks like







I live in the southwest FL area anyone willing to help cold 12 pack waiting.
 

·
Registered
Joined
·
170 Posts
when I put my Pypes mufler on it was off a bit, I just put my foot on the tip and pushed it until it was centered. good luck with correcting the problem.
 

·
Registered
Joined
·
2,247 Posts
I dont know much about cars but could it be the way the pipe is shaped? i assume they just used the stock pipes correct?
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
they used the stock pipes, but it should be a direct replacement as i was told when i bought it from a/m.

I have no clue on how to fix it, some say to move into place and tighten bolts others say it needs to be bent i have no clue . I thought maybe one of you guys would know why it was so off.
 

·
Admanistrator
Joined
·
13,320 Posts
Did they weld it on? That thing is definitly leaning. Can you twist it by hand?
 

·
Registered
Joined
·
281 Posts
stick an aluminum baseball bat in the tip and pull to the side and adjust it.

or just take off the muffler and bend the hangers on the muffler accordingly
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top