[SCHROEDTER]

I am going to soon be rebuilding my stang. i was thinking a 347 forged stroker kit not sure on pistons yet.. then i was going to get a nice pair of GT40p heads and have a local shop clean them up port and polish and maybe put bigger valves in, also get a nice GT40 lower intake and have them port and polish that to, i was also thinking of putting in an E303 cam or something in that line, nothing super extreme so it wont run well. I will be increasing the boost from the kennebell blowzilla from what it is now at 7-8psi to around that 12-14psi. any tips or advise is welcome. let me know what you guys would do, i still want to be able to drive it and have it run nicely. also could you give me and estimate on the hp numbers..
thanks

 

[95StangMX]

I hope you plan on using an aftermarket block?

 

[SCHROEDTER]

i wasnt planning on changing blocks, i will have a very conservative tune put on, the stock block is supposed to be good for up to 450-500hp is what ive been told i should be sitting around that 450hp i think with this type of setup. maybe im wrong tho?

 

[Blacksunshine98]

Tick tock tick tock tick tock


































































BOOM!!!!!!!!!

 

[Lind]

why build a 347 and put a 302 part on it? those gt40ps will bottleneck your set up not including the KB

as far as adding boost its pretty straight forward, just adding a smaller pulley to the mix and having the whole set up tuned together after its all done