afr cam choice question

818 Views 6 Replies 5 Participants Last post by JBIGBOOTSY, Feb 3, 2008

speedtrip

Discussion Starter · Feb 2, 2008

Found lightly used fti cam ground for afr165 and my supporting mods. Duration @ .050 222/232 with 563/565 lift on 110 lsa. Will i have any issues with this head cam combo and stock pistons? And please dont say check p/v clearance because i havent bought cam yet. I will eventually check to be safe but would like to know before i buy. I dont want to notch pistons. Cam owner couldnt answer question he had shop build everything for him. Ive only assembled the stock components and have no experience with changing around the valvetrain...thanks

Save

1 - 2 of 7 Posts

Mlx50man

· #3 · Feb 3, 2008

im gonna go out on a limb here and so no...suposedly the most lift you can use with stock heads and pistons is around .444" lift, soo with afr heads with bigger valves and a bigger than .444" lift cam i wouldnt think it would work

Save

Mlx50man

· #4 · Feb 3, 2008

sorry i ment .544" lift....my bad.

Save

1 - 2 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month