Modded Mustang Forums banner
1 - 2 of 2 Posts

·
Savage 2v
Joined
·
1,701 Posts
Discussion Starter · #1 ·
Well, after redoing my PPRV delete on my dual Cobras, and installing the new Cobra tank in yesterday, I'm still pretty sure one of my gates hoses are kinked. I did my best trying to put the pumps in there nice slow and steady and watching for kinks. You can only see so much with a flashlight. Won't know for sure til it goes back on the dyno. If it spikes lean just over 5k rpm, then that's the problem. OR a bad pump, but I'm doubting that. I've been searching for other methods of doing this, and I stumbled upon this recent thread on SVTP.

My PPRV Delete - SVTPerformance

I already have two 7" and one 12" hoses ordered just incase I have to drop the tank again and redo the delete. This should eliminate any type of kink that could be possible, and is a very tight fit on the pumps/Y/hat. I'll be sure to add hose clamps for extra insurance as well.








I'm sick of dropping that damn tank....:shiftyeyes
 

·
Savage 2v
Joined
·
1,701 Posts
Discussion Starter · #2 ·
I must be the only one thinking this is a good idea...lollll

Nice..now there is a database error on SVTP
 
1 - 2 of 2 Posts
Top