Modded Mustang Forums banner

Check-in engine?

666 Views 12 Replies 5 Participants Last post by  07 STROKER
Anyone know what I would get a p0171 code? it says the sym is to lean?
1 - 2 of 13 Posts
You have a unmetered air leak after the MAF Sensor. You may have tightened the clamps to much thus collapsing the intake. Go back and recheck everything. Also check to make sure you have the Line from the Valve Cover to the intake snapped in all the way and that the o ring is not damaged.
  • Like
Reactions: 1
Thank you more people need to do that.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.