Modded Mustang Forums banner
1 - 14 of 14 Posts

·
Registered
Joined
·
283 Posts
Discussion Starter · #1 ·
just wondering where to find clear or blacked out marker lenses (front corners and rear corners on the side) and stealth bulbs to go with. I've tried searching but havent found anything.

i havent decided clear or tinted yet. so opinions on where to find both would be great!

thnx ahead of time!
 

·
Registered
Joined
·
872 Posts
If you go tinted, just do them yourself with tint from the local parts store. That's what I did, and if you are careful and use a heat gun, they turn out perfect.
 

·
Registered
Joined
·
283 Posts
Discussion Starter · #5 ·
unfortunately i'm not very technically or mechanically inclined so i wont be doing it myself. i see now that they have the smoked front corners on AM but i didnt see those the other day. what about the clear lenses and stealth bulbs if i go that route? Also do the have the smoked or cleared lenses for the rear side markers. Or do people just custom make those as well?
 

·
Registered
Joined
·
583 Posts
I know for a fact that they have the clear ones on AM. But just give it a shot yourself man...never hurts to trial and error ****. And it's a really small area that is being covered - simple!
 

·
Registered
Joined
·
476 Posts
for your color i say clear but at the same time depends on your future mods as far as looks...what plans do u have for looks?
 

·
Registered
Joined
·
1,259 Posts
dude its so easy, you could just tape off the car and do it on the car or you could just remove them, spray slow and thin coats and you are good. ill do mine soon
 

·
Registered
Joined
·
1,427 Posts

·
Registered
Joined
·
7,994 Posts
Yea i bought tint for my lights and put them on my gt i had. The material was good, and looked great. It was from stangmods as well. And it is really easy to do.

In my opinion, you cant rely on someone else to do everything for you, or at least for your car. Thats the fun with modding it. Putting it on
 

·
Registered
Joined
·
13,629 Posts

·
Doctor of Jurisprudence
Joined
·
2,945 Posts
+1 on doing it yourself. Seriously its no more technically difficult than what you'll ALREADY have to do.

1) you'll have to remove the turning signals anyways (which is the hard part)
2) you'll save yourself some easy money for other mods (not like we're daring you to install hoodpins)

So just try this one day, remove just one turning signal and apply tint. I'm talking WINDOW TINT, not spraying niteshade. If you don't like it then you can peel it right off, no harm no foul. THEN you can go waste your money on someone else's creation and tell yourself that at least you're boosting the economy because you're creating jobs in China... :cool:
 
1 - 14 of 14 Posts
Top