Modded Mustang Forums banner

electric fan install help

1613 Views 17 Replies 4 Participants Last post by  91cobra5.0
went to the junkyard today to find an electric fan, i found a newer, like late 99 or early to mid 2000 import with some really slim dual 10" system and figured those would work great, so here i got them home and pulled took off the plug in for the factory system, there were only 2 wires i figured easy, power and ground, black would be the ground, then there was a blue wire and now im confused as to weather that is poer or something else, wt can u guys add?
1 - 2 of 18 Posts
power could be alot of differnt is always groung.. if there is only 2 wires u can switch them to change the poliaritys and it will change which way the blade will spin.. just hook it up to a battery to see which way u want ti to spin..
relays are cheap and easy to use just go to home depot and get one..
1 - 2 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.