that fan looks small. I hope it pulls enough to keep ya kool.....
electric fan install help
went to the junkyard today to find an electric fan, i found a newer, like late 99 or early to mid 2000 import with some really slim dual 10" system and figured those would work great, so here i got them home and pulled took off the plug in for the factory system, there were only 2 wires i figured easy, power and ground, black would be the ground, then there was a blue wire and now im confused as to weather that is poer or something else, wt can u guys add?
1 - 4 of 18 Posts
mystery heads?
I have a friend whos son has a Mustang and they are pullin it apart to make sure everything is kosher. I have a head question. he said after removing the intake and inspecting the heads everywhere he cannot find no signs of what kind of heads they are. they are aluminum and all he can notice is by using 2 mirrors up under where the intake would mount between cyl 3&4 and on the other side between cyl 5&6 there is the number 9035. besides that he said there is 2 header bolt holes on each side of the port, so each exhaust port has 4 holes. Can anyone give an idea to what heads these might be?
I have a friend whos son has a Mustang and they are pullin it apart to make sure everything is kosher. I have a head question. he said after removing the intake and inspecting the heads everywhere he cannot find no signs of what kind of heads they are. they are aluminum and all he can notice is by using 2 mirrors up under where the intake would mount between cyl 3&4 and on the other side between cyl 5&6 there is the number 9035. besides that he said there is 2 header bolt holes on each side of the port, so each exhaust port has 4 holes. Can anyone give an idea to what heads these might be?
Oops I meant to start a new thread..LOL!!! Ignore this. sorry..I have a friend whos son has a Mustang and they are pullin it apart to make sure everything is kosher. I have a head question. he said after removing the intake and inspecting the heads everywhere he cannot find no signs of what kind of heads they are. they are aluminum and all he can notice is by using 2 mirrors up under where the intake would mount between cyl 3&4 and on the other side between cyl 5&6 there is the number 9035. besides that he said there is 2 header bolt holes on each side of the port, so each exhaust port has 4 holes. Can anyone give an idea to what heads these might be?
What about it? I would say to be safe get a 30a relay. Because you have a relay that allows you to use a low current switch. thats it..well theres 2 fans its a dual fan system, and wt about the feakin relay?
1 - 4 of 18 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Modded Mustang Forums
A forum community dedicated to all Ford Mustang owners and enthusiasts. Come join the discussion about performance, racing, builds, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Top Contributors this Month
View All
Diode Dynamics
30 Replies
07gtS197
6 Replies
hscheffler2
5 Replies
Recommended Communities
