Modded Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
193 Posts
Discussion Starter #1
okay i dont want to spend the extra like 250 on rear coilovers.. my question is can u use the ford c springs jsut for the rear and still get teh weight transfer i need? or should i cut the stock springs just a bit to give me mayb a 1 inch drop
 

·
Registered
Joined
·
1,598 Posts
I assume you have front coil overs or are considering them.

You do not need to get rear coil overs. In fact, unless you are planning to get a trailer queen set up, you probably do not want coil overs at all for the rear. C springs will work fine.
 

·
Registered
Joined
·
7,994 Posts
I had the c springs. I liked them, i only spent 150 but dont know if they are that price anymore. Alot say cutting isnt bad, but i see no point. Just buy the springs if you wanna go lower
 

·
mm's nitrous mod
Joined
·
12,988 Posts
the frpp springs are made to run on coupe or vert. cutting of the springs refer to the rears as there is a dead coil for the extra weight for a vert. i have c-springs and the rears havve the dead coil cut from them.
 
1 - 5 of 5 Posts
Top