Modded Mustang Forums banner
1 - 14 of 14 Posts

·
Eat Springs, **** Valves
Joined
·
9,332 Posts
Discussion Starter · #1 · (Edited)
Some of this stuff is a repost from my older thread, some of this stuff is more stuff I dug up:

First up is an FRPP CAI. Same thing thats on a Bullitt. This has a hole cut in it so I could run a Shaker with it. It doesn't affect performance at all. There is also a broken MAF screw. I ran it with only one screw holding the MAF on for 2 years or so. Broken screw could be removed and the hole retapped. The filter is a washable Airraid filter. Was cleaned about 2k miles ago. $130 shipped



Factory 18 in Bullitt Wheels. 18x8.5. These are crazy clean! They come with TPMS sensors. $400 local, $450 + shipping to be shipped.





Bargain bin. This **** has been sitting in my garage since the summer. Its various top end parts from my old motor. Timing parts, injectors, some other stuff. If you're looking for a stock engine part, let me know and I'll dig through the box.

 

·
Eat Springs, **** Valves
Joined
·
9,332 Posts
Discussion Starter · #3 ·
I dug through the bargain bin a bit today.

I have stock injectors, auto flexplate, older intake with no IMRC plates, exhaust gaskets, oil pump, and engine mount brackets.


Timing cover, x pipe, OTAs, sold!
 
1 - 14 of 14 Posts
Top