Modded Mustang Forums banner

FS: Complete Eaton M112 S/C kit for 99-04 V6's

5515 Views 25 Replies 15 Participants Last post by  koessl
Name: Jordan
Location (city, state): Columbus, OH
Items being sold:Complete Eaton M112 supercharger kit for 99-04 v6 mustangs

so iv had my M112 kit on for about 5 months now. ran great. loves everything about it just looking to settle down, save some $ and possibly get a mach 1 or maybe even a c5. i really am torn to sell the kit so i dont have to. if the price is right ill let it go. its everything you need to do with m112 swap and it has a JLT high boost CAI, pre shave blower, billitflow 3.4 pulley and a steeda 3.10 pulley, (8) 39# injectors, shortest adaptor plate you can get for the set up.. i made the #'s in my sig on this setup with a very conservative tune with only about 16* of timing pulled. not sure on a price yet. some where around $2,300. let me know

Eaton M112
Supercharger Adaptor Plate (1.75" tall)
Cobra 39# Injectors (8)
Cobra Plenum
Cobra TB (2)
plenum gas
MYSTEED Idler Pully Kit
TB gasket
Cobra MAF
Cobra egr delete
JLT High Boost CAI (Black)
IAT connector
IAT sensor
New serpentine Belt
Tuned SCT Chip ( already tuned for setup)
Billetflow 3.40 Pulley and Hub
Razors Edge 2.80 Pulley and Hub
Steeda 3.10 Pulley
Autometer boost/Vac gauge
Autometer Water Temp Gauge
Autometer Double Pillar Pod
Throttle Cable/ CC bracket
Upper Intake Gaskt (new)
NGK VR6 spark Plugs (6)
Permatex Ultra Black RTV (Supercharger Gasket)
12 bolts for adapter to V6 lower intake
12 washers for intake bolts
10 bolts for M112 to adapter
4 bolts for the plenum to the M112
4 bolts for the throttle body to the plenum
4 bolts for the MAF to CNC flange
2 bolts for IAC delete to plenum
2 bolts for IAT relocation to M112
2 bolts for Cobra throttle cable bracket
2 clamps for air filter

Machine Work-
SuperCharger Lip Shaved (cost me $275)



See less See more
1 - 1 of 26 Posts
1 - 1 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.