Modded Mustang Forums banner

1 - 19 of 19 Posts

·
Registered
Joined
·
1,762 Posts
Discussion Starter #1 (Edited)
How do you calibrate a new thing that has like 150mph on it or what ever??

do they have all digital replacements for stangs??

or is is there any other color than ****ing white jesus
 

·
MM's Resident Ricer
Joined
·
9,892 Posts
tuner,
 

·
¡ʇsnq ɹo uʍop ǝpısdn
Joined
·
12,571 Posts
you might have to have ford do it... a tuner should be able to calibrate the computer for new gauges though
 

·
MM's Resident Ricer
Joined
·
9,892 Posts
whats that **** that one guy has, its like blue or something

like a speedo gear? those are just for rear end gear changes if thats what your talking about

and OMZ ford wont recalibrate an aftermarket gauge
 

·
MM's Resident Ricer
Joined
·
9,892 Posts
oh those are either reverse glow or just some sort of color swap gauge set
 

·
MM's Resident Ricer
Joined
·
9,892 Posts
what??? its not gps. you can get them on ebay
 

·
MM's Resident Ricer
Joined
·
9,892 Posts
oh yeah, if you get your chip reburnt they can fix that on there
 

·
¡ʇsnq ɹo uʍop ǝpısdn
Joined
·
12,571 Posts
i remember now, you have to grab a cobra one ( or gt or w.e) and you have to combine that with a V6 one but put the cobra speedo into it... its a bit of work, but if you go to a scrap yard and get them out of wreckers it might work ... lemme see if i can find info to back that up
 

·
¡ʇsnq ɹo uʍop ǝpısdn
Joined
·
12,571 Posts
it can't and your PATS would go off, you have to disassymbel them and put the circuit board from the Cobra into the V6 one, and you also need the cover plate from the gauges, at least thats what i remember reading... 3.8mustang.com 's search engine is down so i can't find it
 
1 - 19 of 19 Posts
Top