Modded Mustang Forums banner
1 - 20 of 26 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter · #1 ·
let the guesses begin
livernois balanced and blueprinted 347 stroker
afr 185 heads
lunati 51018 cam242/ 252 Duration @0.050 560/576 Lift
edelbrock vic jr intake
holley aed 750 carb
1.6 roller rockers
11.1 compression
msd 6al box, coil, dizzy, and wires
kooks 1 3/4 long tubes
3 inch dr gas x-pipe
3 inch spintech mufflers

going through a tko 600 and 4.10 gears

I'm hoping for around 350 at the wheels
 

·
Registered
Joined
·
5,556 Posts
let the guesses begin
livernois balanced and blueprinted 347 stroker
afr 185 heads
lunati 51018 cam242/ 252 Duration @0.050 560/576 Lift
edelbrock vic jr intake
holley aed 750 carb
1.6 roller rockers
11.1 compression
msd 6al box, coil, dizzy, and wires
kooks 1 3/4 long tubes
3 inch dr gas x-pipe
3 inch spintech mufflers

going through a tko 600 and 4.10 gears

I'm hoping for around 350 at the wheels
350 is a reasionable number
 

·
Registered
Joined
·
75 Posts
Discussion Starter · #12 · (Edited)
I did three pulls that was the first pull and he went to 5500 instead of 7000
In the second pull the tach wire came off and said the car made 279hp and 325 tq and the third pull was with the 393hp and 370tq

Ill try to get the sheet scaned in tonight, the afr was between 11.5-12.5. The reason it didnt get rejetted at the dyno is because i wasnt there to tune, i was there to see where i was at.
 

·
Come at me bro
Joined
·
3,135 Posts
im still not getting where you gained 30hp and 20 torque from...... you said you didn't tune it....... so whats up?
 

·
Registered
Joined
·
261 Posts
Nice numbers. Any more pics of the car? Im thinking of going with black bullets after I get my pile painted solid white.
 
1 - 20 of 26 Posts
Top