Modded Mustang Forums banner
1 - 1 of 1 Posts

· Premium Member
11,664 Posts
Try this first- hold down your trip/reset button and turn your key on. The gauges will sweep all the way up, then all the way down. Then release the trip button, press it and release one more time and you should see all of the bulbs light up and "BULB" light in the odomiter. (You could continue, but most are diagnostic codes coming from the computer and are useless without knowing what they are or having the conversion tables handy. One though is a digital tach.) Press and hold the trip button again to get out of the diagnostic mode.

If this doesn't work, you will more than likely need to reset all of the guages one at a time manually.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.