i have 87 mustang gt i dont know much about the car other than cai bbk headers and nos.
need so advice looking to go up to 70mm throttle body with 24 lb injectors, do i need a mas meter?
there is not one on car now. thanks
Noob here - I have progress threads on my 1988 GT in a few other forums and have asked this question in those threads but I'm just going to jump to this here, since it's my current predicament.
I have a 1988 GT that I've been working on. I bought it back in January from a guy who was the...
I'm looking for a pair of GT40 or GT40P Cylinder Heads from a 5.0L 89-95 Mustang; 95-00 Explorer; or 95-00 Mercury Mountaineer. I'm a half hour northwest of Atlanta, GA, and would be willing to make arrangements to pick them up. Please let me know. Thanks!
So after installing heads, cam and intake my stock lifter roller tips are not shiny anymore like they were with the stock cam. The rollers don"t necessarily look damaged just more of a dull looking surface. Is this a cause for concern ? Could it be from the higher valve spring pressure ...
Hello guys, great community you've got here. Please move this if it's not in the right section.
I've got my 1982 Foxbody GT. I'm replacing the front sway bar, and also want to replace the sway bar bushing brackets. Not the mounts on the body, not the bushings (already have new), but the metal...