[StutteringStang06]

i have the aftermarket halo angel eye projector lights from american muscle and ive had them since april, and today while i was deatailng my car for the show im going to tomaro morning i noticed that on my passenger side light i had mosture build up on the lower half of the light, please help i dont wanna have it looken stupid for the show tomaro and am is open till monday. (and yes when i bought the lights i put sealer around them)

 

[1rnkpny]

Most aftermarket lights that I have seen have this problem.

 

[trill gear head]

use stockers...

 

[Mr.Stang08]

I thought it was gonna be like water sitting at the bottom. I also heard about this problem on aftermarket lights. Sit it outside for a while and see if the heat burns it away.

 

[XectriK]

Take the lights out in the sun and let the water evaporate. Then seal all of the edges and creases with silicone.

 

[06RedfireGT]

Start the car and turn the high beams on, that should take care of it.

 

[StutteringStang06]

when i first bought the lights i sealed them with silicone, and i did every one of those steps and it keeps coming back so think there still under warnety and if so AM will send me new pairs when there open monday. i hope

 

[Emay]

remove bulb, use hair dryer to send warm air inside.

 

[TheUNZippee!]

Spank me later. :spank



How To Fix Your Mustang Headlights If They Are Condensating - Installation Instructions at AmericanMuscle.com