Modded Mustang Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I know alot of you guys hate giving estimate because you hear it over and over.Im newq to the foxbody so... I have a 1987gt All stock except for bbk shorty headers, h-pipe no cats, flowmaster and a cobra upper & lower intake. Oh.. and of course K&N in stock box. How much Ponies do you think i have and It is a 5spd sowhat kind of ET with a good driver? Thanks everyone.
 

·
Registered
Joined
·
101 Posts
hey i got a 331 stroker eld. peformer rpm cam, intake,and alum heads 2.02 intake 1.94 exhaust, shortty headers injectors, mass , tb, any idea on hp and even ets with 3.73gears and t-5
 

·
Registered
Joined
·
2,111 Posts
Talk about thread jacking ^^ :no

Chad >

You can expect about 200-210rwhp. With a good set of tires, and some practice, 14.0s shouldnt be a problem at all.
 

·
Registered
Joined
·
2,950 Posts
hey i got a 331 stroker eld. peformer rpm cam, intake,and alum heads 2.02 intake 1.94 exhaust, shortty headers injectors, mass , tb, any idea on hp and even ets with 3.73gears and t-5
low 12s and maybe high 11s with sticky tires and good driver
 

·
Premium Member
Joined
·
11,367 Posts
I know alot of you guys hate giving estimate because you hear it over and over.Im newq to the foxbody so... I have a 1987gt All stock except for bbk shorty headers, h-pipe no cats, flowmaster and a cobra upper & lower intake. Oh.. and of course K&N in stock box. How much Ponies do you think i have and It is a 5spd sowhat kind of ET with a good driver? Thanks everyone.
240ish at the flywheel and 13.70s or so if you can drive. On slicks with a good driver probably 13.30s.
 

·
Premium Member
Joined
·
11,367 Posts
hey i got a 331 stroker eld. peformer rpm cam, intake,and alum heads 2.02 intake 1.94 exhaust, shortty headers injectors, mass , tb, any idea on hp and even ets with 3.73gears and t-5
400ish horsepower (flywheel) and 11.60s or so with a good driver.
 

·
Registered
Joined
·
5,029 Posts

·
Premium Member
Joined
·
11,367 Posts
umm 1.94 exhaust???
Typo. He either has a 1.94 or 2.02 intake and a 1.50 or 1.60 exhaust. Either way it isn't going to make much of a difference.
 

·
Registered
Joined
·
5,029 Posts
Typo. He either has a 1.94 or 2.02 intake and a 1.50 or 1.60 exhaust. Either way it isn't going to make much of a difference.
oh i know ive just never heard of a 1.94 exhaust valve.
 
1 - 11 of 11 Posts
Top