Modded Mustang Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I have an 04 with some bolt ons and was wanting to know how much hp Im making the bolt on are cai. Full exhaust system with mid lenght headers an a o/r xpipe borla catback, ud pullie and a 75mm throttle body with the 93 oct tune from the diabo tuner
 

·
Registered
Joined
·
343 Posts
that's about like my engine, and my dyno software says about 324 hp at the crank
 

·
Registered
Joined
·
343 Posts
It made a huge difference, it's a great combo between good driveablity and not killing your gas mileage lol
 

·
mm's nitrous mod
Joined
·
12,988 Posts
if staying n/a and not doing much interstate driving, go with 4.10's. around town driving and n/a passes at the track is great with the 4.10's.
 

·
mm's nitrous mod
Joined
·
12,988 Posts
upper plenum if on a budget. the stock upper plenum is the restriction of the inlet system. if you have a little more to spend, i would get cams.
 

·
Registered
Joined
·
35 Posts
Discussion Starter #14
Yea I already have that just foregot about it since it all looks like one pice I went with the trick flow
 

·
mm's nitrous mod
Joined
·
12,988 Posts
well, then you should be getting to the 260 mark. i dyno'd 261/301 with my car. i was bolt on and i modified the canned tuned as well.
 
1 - 16 of 16 Posts
Top