I miss OHC230
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
2.3 8 plug to 4 plug
2.3 MustangsHey guys im looking to build a 2.3 for a race car, most motors ive found are fuel injected 2.3s, can i take the 8 plug head off, switch it with 4 plug from an older model and run carburetor and do away with all computer and stuff,- 1
- 117
-
2.3 Turbo in Austin Healey??
2.3 MustangsBeen researching engine swaps for my 1957 Austin Healey 100-6. Thinking about a 2.3 turbo with a T-5 transmission. Lots to digest. Use an 87-88 Thunderbird 2.3 Turbo, Mustang SVO, Ranger roller rockers, Duratec etc??. Can anyone point me in a direction? What is the best combination of engine...- 2
- 215
-
2.3 Info/Build Planning
2.3 MustangsWell this is a shot in the dark since this section is pretty dead, but hopefully there's one or two lurkers out there that could help. Basically I still have my 88 2.3 LX for shits and giggles. I've got some parts laying around the garage and I'm curious what I can do, especially in regards to...- 0
- 753
-
WickedSnake00 · updated
-
2.5 Ranger intake
2.3 MustangsI have a Ranger 2.5 intake. Motor is stock. Aside from UDP headers and exhaust and 17lb Bosch injectors. Has an SVO 5spd swap and 3.73 gears. I'd like to have it ported before installing it and half shaft the TB. In the future i would like to step up to a 2.5 ported head as well. Question is do...- 1
- 586
-
Getting ready to add tilt steering
2.3 MustangsI really hate having to swing my leg under the wheel when I get in . Wife doesn't mind but I do . Especially if making frequent stops . If I get a column from a 5spd car will I have a problem with not having the A/T lock out ? I drove around with an automatic column on my 5spd Jeep for years...- 1
- 750
Join now to ask and comment!