Modded Mustang Forums banner
1 - 2 of 30 Posts

· Premium Member
Joined
·
11,000 Posts
:withhomo. yeah just upgrade everything and while your at it go ahead and get the ARP cam bolts and balancer bolt. I had that go bad on mine
 

· Premium Member
Joined
·
11,000 Posts
because they are torque to yield meaning can only be used once then they are no good and need replacement but just use them again if you want, but at least get the rest of the parts and the chains do sag if they are old even with the tensioners but its your car im just saying what good is your nice stang with all those mods in it if down the road the **** breaks down and then you will have to spend even more to fix it when that money can go to getting some more mods or some thing else you would like but to each his own
:withhomo. I thought my chains were fine until i put one up against a new one and there was a slight difference in it. the other was good but I went ahead and just replaced everything. The cam and balancer bolts are TTY. Ive seen some people reuse them and nothing wrong and then others reuse them and the cam bolts would snap totally destroying things so i decided why risk it. Its up to you whether you decide to reuse them or not but just be aware of what may or may not happen.
 
1 - 2 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top