Modded Mustang Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
39,159 Posts
One thing your hp and tq numbers should be way higher than that. By about 100hp.

But you have 20's, a blower, and gears so you will get zero traction. The best advice I can give you is to slip the clutch in 1st from about 2000rpm, then feather the throttle in the rest of first and second, then you can mash it in third.

You best bet would be to take you stock wheels, if you still have them, and put some these or these on them.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top