Modded Mustang Forums banner
1 - 1 of 13 Posts

· Registered
13,686 Posts
I am almost done with my suspension and it has been done piece by piece. I will list the order in which I think works pretty good, at least it has for me. You don't have to do all of the things listed and can stop modding anywhere as far down the list as you want to fine tune your suspension.

Adj. panhard bar
Camber bolts/plates, however you decide to adjust camber if you need to.
Struts & shocks
LCA's, with brackets if you need them.
Adj. UCA
Strut tower brace
Front and rear sway bars
Adj. front sway bar endlinks
Bump steer kit
K-member and A-arms

That is my plan and I just ordered my BMR sway bars so there are only a couple things left before I think I am done. I might be done after the bump steer kit 'cause there are many things I want to do before the K-member gets done.

So follow the order of this list as far down as you want and you should be good brother..
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.