[99v6stang]

Okey i have...
m112
throttle body
plenum
injectors
MAF

i found the fuel pump off vmp, but as for the idler and bracket, would this work? BilletFlow 03-04 Cobra Snub Idler Bracket and Pulley [BF-SNUBIDLERPULLEY] - $124.95

Also is an intercooler needed for a v6 setup, or is the heat not as much of an issue?

 

[itschristorres8]

that idler shoud be fine

but talk to mysteed, he found a different routing you can use
and ive yet to seen a intercooler m112 v6

02 was going to do it when he was on here but supposedly just as he had all the parts he backed out?

 

[ESG-642T]

Yeah nobody has done an intercooler ....


Didn't 02 "sell" his car and buy something else rofl?

 

[99v6stang]

so would there be any point to adding an intercooler on the v6? If so im up for the challenge

 

[ESG-642T]

so would there be any point to adding an intercooler on the v6? If so im up for the challenge

Its more than you wanna try to work on...

And you would need a 6" cowl hood.

 

[99v6stang]

well im already going to need a monster of a hood, im going with a cobra r and then a hood scoop on top of that

 

[ESG-642T]

well im already going to need a monster of a hood, im going with a cobra r and then a hood scoop on top of that

6" cowl = track car.

 

[Onemanzu]

mysteed is going to be the one that knows what up on this...

also 02 did sell out and get a GTi ... like an 03... some one did by his **** and then joined this site... if you cared you could track him down

 

[El_Cangri]

I was wondering what happened to 02..

 

[shadow5403]

well im already going to need a monster of a hood, im going with a cobra r and then a hood scoop on top of that

The M112 should fit under the cobra r hood no problem.

 

[ESG-642T]

The M112 should fit under the cobra r hood no problem.

m112 is too big...
I'm 98% sure.

 

[Onemanzu]

get a spare hood from a junk yard ... cut a hole in it... fiber glass over it and make your own hood

 

[plove71387]

I was wondering what happened to 02..

I bought most of his parts, and im hoping to get started on this by this weekend, i finally got almost all my parts, just need two more .. which im sure ford carrys so .. all should be starting soon!!

-Preston

Pm me if you want any information!

 

[whitemustang02]

The M112 should fit under the cobra r hood no problem.

the cobra R is only a 2.5 in cowl

 

[itschristorres8]

lol mysteeds selling out the m112 as well
impretty sure hes going to start spooling
everyone seems to be getting so smart

 

[plove71387]

the cobra R is only a 2.5 in cowl

You can get a 3" Cobra R Cowl i belive, Stage 3 Motorsports 1999-2004 Mustang 3 inch Cowl Hood .. im pretty sure .. thats what my quick google search showed.

-Preston

 

[whitemustang02]

ya i should have been more clear i am was talking about the 2000 cobra R not the 95, don't know which one 99v6stag was talking about

 

[plove71387]

ya i should have been more clear i am was talking about the 2000 cobra R not the 95, don't know which one 99v6stag was talking about

Wasent trying to Bash you or anything .. just was stating it was there!

 

[whitemustang02]

Wasent trying to Bash you or anything .. just was stating it was there!

i know i was just Clarifying it

 

[ESG-642T]

3" cowl wont cut it.