Modded Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I'm on the last leg of the install and I don't want to mess up here are my 2 issues:

1: while installing my new fuel injectors I dropped something in where the fuel would shoot into the motor, I'm hoping there is some sort of filter in there but would anyone know how to fish this item out it looked like a piece of glass from what I could tell

2: I need to splice into a manifold vacuum line with a supplied 3/16" X 3/16" X 3/16" plastic tee and connect the line to the vacuum port on the surge valve seems easy enough its just that I don't know what the manifold vacuum line looks like and I don't want to splice into anything until I'm 100% sure of what I am cutting. I tried googling what this line is but I'm still not sure.
 

·
Registered
Joined
·
1,096 Posts
I don’t have an EGR anymore so I used the vacuum hose for that line to run a T for the boost gauge and the blow off valve. You could do the same except run one T for the bypass valve and another T for the boost guage if you plan on using one.

As far that piece of glass...do whatever you have to to get it out.
 
1 - 2 of 2 Posts
Top