Modded Mustang Forums banner
1 - 11 of 11 Posts

· Registered
Joined
·
2,311 Posts
Discussion Starter · #1 ·
So in the spring I am going to be putting on a 17X10.5 '95 Black Cobra R rims with a 315/35R17 tire (still planning what tires because I will need new one all around).

Rims
Black 1995 Style Cobra R Wheel 94-04 (17x10.5) at AmericanMuscle.com - Free Shipping!

I have been hearing that this rim and tire will not just bolt on and that I have to do work first. If this is the true what do I have to do to get this wheel and tire to fit with no problems? I might be doing some suspension work as well, not fully sure what yet, but it might be dropped about 1-1.5 inches.
 

· Registered
Joined
·
2,685 Posts
i have the h&r super sport springs with no iso's and 17x10.5 03 cobra rims with 315 nitto nt05 tires in the back with no problem at all
 

· Registered
Joined
·
2,311 Posts
Discussion Starter · #10 ·
Cool. I heard from a couple of people that the quad shocks would be a problem, but if no one is having any problems with them, that will make life just that much easier (and cheaper lol) in the short of it all.
 

· Ginger with No Soul
Joined
·
1,313 Posts
You don't need to flip the quad shocks. 315/35-17s will fit fine with no modifications. My car is lowered 1.25 inches. I run 325/45-17s on my rear 17X10.5s with no problems or modifications done;)
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top