Modded Mustang Forums banner

1 - 18 of 18 Posts

·
Registered
Joined
·
477 Posts
Discussion Starter #1
Whats up. Names Randy. I own a 95 v6 mustang

Mods are Engine Bored 0.030 Over, Ported Heads, JEGS Exhaust Cutouts, DEI Exhaust Wrap, BBK 56mm TB, Aluminum Driveshaft, VAP 1/2" IMS, 180 Degree Thermostat, SCT XCal 3 Tuner, Ported UIM, BBK UDP, Aftermarket CAI, Pypes 2.5" Dual Exhaust w/o Cats, Pypes Street Pro Mufflers Dumped, Screamin Demon Ignition Coil, 8.5mm Livewire Spark Plug Wires

Here is my mustang/engine bay





I also plan on boosting my little 6 :cool: here is what ive got so far

58mm Turbo
Intercooler kit (aluminum piping)
BBK AFPR

 

·
Registered
Joined
·
244 Posts
wow man! welcome and very impressive. be sure to make a turbo build thread!

what kinda power are you making?
 

·
Registered
Joined
·
357 Posts
That car is gonna be a sleeper when its done. Good luck! Ask any questions you need to. Everyone will be happy to help.
 

·
Banned
Joined
·
15,799 Posts
I saw you said you had motor work done. Just curious if its a stock rebuild bored over or forged rod/piston combo.

Good luck with the boost
 

·
Registered
Joined
·
477 Posts
Discussion Starter #6
wow man! welcome and very impressive. be sure to make a turbo build thread!

what kinda power are you making?
thanx

right now...a little above a stock 99-04 v6 stang(auto though)

with boost i hope to make at least 250+rwhp with 8psi :confused:

That car is gonna be a sleeper when its done. Good luck! Ask any questions you need to. Everyone will be happy to help.
thanx man...i would just need the stock hood back and then it will be a true sleeper, lol ;)

cant wait to see this when its finished! :popcorn
and welcome to the forums btw!
thanx :)

I saw you said you had motor work done. Just curious if its a stock rebuild bored over or forged rod/piston combo.

Good luck with the boost
yes its just a stock rebuild, i didnt have enough money for forged rods/pistons :sorry

but my next rebuild i will for sure have all that ;)
 

·
Registered
Joined
·
244 Posts
250 rwhp will be easy for you on 8psi. i expect with the turbo setup a good tune you could see over 300 possibly?
 

·
Registered
Joined
·
477 Posts
Discussion Starter #10
250 rwhp will be easy for you on 8psi. i expect with the turbo setup a good tune you could see over 300 possibly?
well i might just get a BOV with a 12psi spring and just keep the boost low.

And then whenever i get dyno/tuned we could raise it :cool:

Welcome to the forum, good luck on the build man
thanx

ehhhhh.....ur still gay...lol
no one wants u here....jk bro
glad to see u on here as well
lol i knew it was you :p
 

·
2k3 Blown Mach 1
Joined
·
2,183 Posts
:welcome to Modded Mustangs, another member from V6 power?
 
1 - 18 of 18 Posts
Top