[mikestang]

in my experience, sealing them up wont fix his problem, the problem occurs on the outside. there is nothing to prevent this except black out covers or put a coat of clear on them to protect them. to fix the headlight that has turned white, wet sand it down with some fine sand paper such as 1200grit, dont go no gritier than 800,dont worry about them looking all scratched up and not getting them clear again, it comes out with the next step,put a coat of clear on them, they will look brand new, just dont scratch them after the clear, treat like the paint,the plus side is you still have the tint on there because its on the inside. 3m makes a kit that is for this exact problem, that is a waste of money b/c what i said above is all it does exept they use something other than clear.

 

[mikestang]

buffing the mother ****er dont work, its not paint dumbass, what material is there, that will buff hard plastic, not gonna happen all it does is melt the plastic, sand it with some fine sand paper and clear and problem solved for life!!!!!! or go waste your money on some new ones

 

[mikestang]

just joking fellas

 

[mikestang]

i know theres a kit for it, read above post by me, i said there was, but it is cheaper to sand a clear it, maybe 20 to 30$ in it compared to the price of the kit