Modded Mustang Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
321 Posts
Discussion Starter · #1 ·
How much PSI can I safely run through a stock 5.0 as long as its tuned correctly with fuel upgrade and whatnot.
 

·
Registered
Joined
·
4,781 Posts
I would guess the breaking limit is somewhere around 25-35 PSI based on the power produced.

of course more than 15 PSI is going to lift the heads and push the gaskets out...
 

·
Registered
Joined
·
87 Posts
with a set of afr studs and a nice gas kit you could do up to 20 i would not no past that and even thin that is not going to last long. so on the safe side 15 or 16
 

·
Registered
Joined
·
321 Posts
Discussion Starter · #5 ·
I understand the blocks crack around 450-500. I was just curious about forced induction. I'm looking to supercharge soon.
 

·
Registered
Joined
·
321 Posts
Discussion Starter · #7 ·
Muchly appreciated fellas.
 
1 - 7 of 7 Posts
Top