Modded Mustang Forums banner

rattle HELPPPPPP!!!

1869 Views 28 Replies 21 Participants Last post by  redrocket7002
i got this damn rattle coming from either the dash or somewhere in the eng. compt. any one experiencing this? PLEASE HELP!!
1 - 1 of 29 Posts
It might be the parking brake handle. The MGW short throw shifter instructions had a cure for that by dyno matting the holes on the side and front of the metal arm... it only took a second to do it so I did even tho I had no only takes two screws from the back of the console,remove it, and pull apart the two plastic halves of the handle cover... the openings are easy to see... cover them with something... duct tape a few layers thick would probably do can tell if thats the problem by pulling on the handle till the cable gets taught... if it stops then this is your problem
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.