[distrbed10000]

I have recently acquired a .020 over teksid block. It's been sleeved but the sleeves in the block are damaged. Where is a good place to acquire a new set of sleeves to replace the damaged ones. The damage isnt deep enough to hit the cylinder walls of the block but certainly w

 

[WickedSnake00]

I would call around locally and see what machine shops offer them. I think Darton also keeps a list of authorized vendors/installers so you could check that.

 

[y2k02]

You can buy another stock bore teksid block for under $500.

 

[distrbed10000]

I would call around locally and see what machine shops offer them. I think Darton also keeps a list of authorized vendors/installers so you could check that.

I will certainly look at that.

Yk2k, I would pick up another block but everyone wants to have it picked up locally or won't ship more than a couple hundred miles. Every block I have looked at is usually far north or west.

 

[lowboost2v]

Look for 05+ WAP blocks too. They are as if not stronger than the Teksid. That's the word anyways.