Modded Mustang Forums banner
1 - 1 of 18 Posts

· Back from the Dead
1,599 Posts
I think the reason the blackout panel is chipping is when I removed the masking tape from the top, the paint pealed back some with it. Maybe I did not let it dry long enough... because the primer seems attached fine but the black top did not attach good to the primer.
Actually, the thing you want to do is take the tape of as soon as you are done painting. When the paint is dry it is bonded partially to the tape, hence the rips when you take it off.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.