[rasalibre]

I need to make sure that all of my connectors are on the right posts... does anyone have a detailed picture or diagram??? or any advice?

Thanks - Joe

 

[mxnate116]

it doesnt matter which post it is, all the connectors go on the +12 side and just the starter wire on the other.

 

[rasalibre]

what about the alternator connector? and can i use the other post as a ground?

 

[mxnate116]

the alt connector goes on the +12v side

and no when you turn the key to start the car the other post becomes +12v to engage the starter

 

[rasalibre]

thanks... Also the water temp wires located on the water neck, any idea where those go?

 

[mxnate116]

the wires next to the rad cap are for low coolant sensor if thats what you mean
the water temp sensor wires on the heater core rail go to the computer to tell it when to switch out of cold mode.
the other water temp sender wire goes to the guage cluster

 

[rasalibre]

what is the sensor on the water neck?

 

[mxnate116]

its the ect. temp sensor for the computer i think thats what your talking about. have a pic?