Modded Mustang Forums banner
1 - 3 of 6 Posts

· Registered
Joined
·
674 Posts
Discussion Starter · #1 ·
Ok so i just got back from getting my car inspected... Everything still running great with 122,000 miles! woo! anyways i need a front right tie rod, the guy quoted me around 230 for it.

I would like to take matters into my own hands if i could... the problem at hand is the right front tire has slight movement.

would i need anything other then this to fix this issue?

Steeda Bumpsteer Kit (79-04 w/ Manual Steering Rack) at AmericanMuscle.com - Free Shipping!



(he passed me regardless of needing this done, thankfully...)
 

· Registered
Joined
·
674 Posts
Discussion Starter · #3 ·
yeah the guy said just need a front tie rod end... yea the priced seemed like alot to me too... Ill have to check out advanced this weekend...

Easy install though?
 

· Registered
Joined
·
674 Posts
Discussion Starter · #6 ·
This kit is recommended for all lowered Mustangs with caster camber plates. The Steeda kit offers a much wider range of adjustment than other kits!

You aren't lowered that I know of. That is a good product though.

Install is simple, its just a good idea to get your toe checked and maybe even an alignment after. Make sure you install the new one to the exact point that the stock one is on, the thread will allow it to go much further than that, but it needs to be in the same spot.

I would just get the stock replacement from advanced.

Yeah im lowered, I have steeda comp springs, and bilstein shocks and struts... which i belive is 1.2" drop...

So that being the case would recomend getting the kit or just stock replacement? Also would i need to get new ball joints as well?
 
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top