Modded Mustang Forums banner

twin turbo questions

1132 Views 24 Replies 9 Participants Last post by  HBK_2007
ok, ive decided I want tt. my goal is to make a sleeper with 600+hp/600+tq @ 10psi. i want a kit capable of 15psi tho. the kits im considering are HP and Hellion.
1. Which kit would be the best (price vs goals).
2. Can those goals be reached with stock heads/intake (p&p of course)?
3. What cam is recomended?
4. Whats the smallest turbos that will produce the 15psi?
5. What kind of tranny (automatic) upgrades?
6. Which kit can I run cats with?
7. Muffler and exhaust piping suguestions? im looking for a sound that is as close to stock as i can get
8. Can the suspenision offered with these kits be upgraded to air ride?
9. Which rear suspenison would be best to go along with the needed front upgrade?
I have a 1996 GT with a automatic and i do believe it has PI heads/intake, have yet to take the vavle cover off and check for the stamp
1 - 1 of 25 Posts
here is my dino but with a 76mm single, 14psi one at 14deg timing and one at 16deg. stock cam, 3 valve heads and stock intake. 60 lbs injectors and twin gt pumps. It is also a MMR short block with 9:1 compression. I hope this helps

See less See more
1 - 1 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top