Modded Mustang Forums banner

10381 - 10400 of 10639 Posts

·
the U of A
Joined
·
1,308 Posts
Same. If I had any sort of beater my car would already be on the market.

That's what I plan to do eventually, anyway.
 
  • Like
Reactions: jdos1

·
Hot rod Stang
Joined
·
550 Posts
Coyote Red in sport mode

Keeping Coyote Red clean. California Car Cover. New carport.
 

Attachments

  • Like
Reactions: kdaly1

·
Biz Jet Fixer
Joined
·
4,985 Posts
I keep getting to the point of where I serious think about returning my car to stock and selling it. Then I wash it, give it a coat of wax and tire/trim dressing and my mind changes. I still want a truck bad.

Keeping Coyote Red clean. California Car Cover. New carport.
Nooooo. Those are so bad for your paint.
 

·
the U of A
Joined
·
1,308 Posts
Just flipped back to the first couple hundred pages of this thread to when i first joined. brought back good memories lol
 

·
the U of A
Joined
·
1,308 Posts
Ordered a torq 10fx along with some lake country yellow/orange/white pads and HD Speed. I cant decide if I should order some menzerna 2500 and m105/m205 as backups or not..... ****'s expensive lol
 

·
I'm doing it wrong
Joined
·
5,495 Posts
Well started out on this forum with a 2001 v6, then got a 1989 5.0.....









And now I own a Coyote :D 2011, premium, mt82, 400a, security package, factory hids, 3.73s, brembos, Steeda cai, Borla S type axle back, lowered a little bit (not sure on what yet), and came with a sct x3. Only has 50k miles on her (50,5xx). Wasn't sure what tunes were already on the x3 but know they were from at least 3 years ago so I ordered a tune from Lund and waiting for it. :D



 

·
the U of A
Joined
·
1,308 Posts
any plans to mod it?
 

·
11.5:1 or GTFO
Joined
·
12,899 Posts
Factory HID 2011 crew checking in.
 
  • Like
Reactions: paulyboy928

·
11.5:1 or GTFO
Joined
·
12,899 Posts
I'm having one hell of a time getting this damn car lined out. Seems like a new issue every day.
 

·
Biz Jet Fixer
Joined
·
4,985 Posts
Ordered a torq 10fx along with some lake country yellow/orange/white pads and HD Speed. I cant decide if I should order some menzerna 2500 and m105/m205 as backups or not..... ****'s expensive lol
I'd skip M105/205. I don't like it. I've used HD Cut and HD Polish in their place and will never use anything else. It's amazing, very little effort and minimal dusting.

Let me know how you like Speed. I've been wanting to try it but haven't ever gotten around to buying any.
 

·
the U of A
Joined
·
1,308 Posts
I'm having one hell of a time getting this damn car lined out. Seems like a new issue every day.
What's been going on?

I'd skip M105/205. I don't like it. I've used HD Cut and HD Polish in their place and will never use anything else. It's amazing, very little effort and minimal dusting.

Let me know how you like Speed. I've been wanting to try it but haven't ever gotten around to buying any.
Will do. I'm wanting to get a backup but not sure what I should get. I've heard great things about HD adapt but it's hard to find. I won't start working on stuff until the week of may 7th. Finals will be in full force from now till then.
 

·
11.5:1 or GTFO
Joined
·
12,899 Posts
I used M105 on a 99 Cobra, with an orange pad, and it worked really well. Finished it with HD Adapt. Sad, they quit making adapt. I absolutely love that product.

Here's a 50/50 with ONE pass of M105 and an orange pad on that Cobra.

Before and after by Treyson M, on Flickr
 

·
I'm doing it wrong
Joined
·
5,495 Posts
any plans to mod it?
EVENTUALLY, but I'm sure everyone says that. I wouldn't consider it a mod but deleted the resonators yesterday. Gave me the exact sound I was looking for :D waiting on my Lund tune still to see what kind of difference there is from the unknown tune that was already on it from like 3-4 years ago. But it'll make me feel a lot better knowing it was tuned by someone good. What do you guys think I should do next? I don't want anything too crazy for a little while. But oh man are Yotes fun as hell to drive.

*EDIT* I did order one of those all in one gauges too from AM as well as the Roush vent pod, I forgot the name already oops. But I'm a nerd for wanting to know afr and things like that. Can't hurt anything.
 

·
the U of A
Joined
·
1,308 Posts
offroad midpipe, rear suspension (lcas, lca relos, uca+mount, phb+brace), and mgw shifter. Those are all game changers.
 

·
I'm doing it wrong
Joined
·
5,495 Posts
offroad midpipe, rear suspension (lcas, lca relos, uca+mount, phb+brace), and mgw shifter. Those are all game changers.
Thanks, I'll most likely start with suspension. So far it only has lowering springs lol. It does have a Barton short throw already though.
 

·
Biz Jet Fixer
Joined
·
4,985 Posts
I used M105 on a 99 Cobra, with an orange pad, and it worked really well. Finished it with HD Adapt. Sad, they quit making adapt. I absolutely love that product.

Here's a 50/50 with ONE pass of M105 and an orange pad on that Cobra.
105/205 works good I just hate how much it dusts. To me it dusts to the point you basically have to wash the car again instead of just a quick alcohol wipe down as it gets in every crack and crevice. HD Cut works just as well but dusts 1/5 as much IMO.

---------- Post added at 12:16 AM ---------- Previous post was at 12:10 AM ----------

I've actually got a large box of detailing stuff I'd let go very cheap.

A bottle of 105 and 205 is in it. I'll try to remember to get a list this week and let yall know first.
 

·
the U of A
Joined
·
1,308 Posts
Thanks, I'll most likely start with suspension. So far it only has lowering springs lol. It does have a Barton short throw already though.
Good call.

105/205 works good I just hate how much it dusts. To me it dusts to the point you basically have to wash the car again instead of just a quick alcohol wipe down as it gets in every crack and crevice. HD Cut works just as well but dusts 1/5 as much IMO.

---------- Post added at 12:16 AM ---------- Previous post was at 12:10 AM ----------

I've actually got a large box of detailing stuff I'd let go very cheap.

A bottle of 105 and 205 is in it. I'll try to remember to get a list this week and let yall know first.
That would be awesome.
 

·
11.5:1 or GTFO
Joined
·
12,899 Posts
EVENTUALLY, but I'm sure everyone says that. I wouldn't consider it a mod but deleted the resonators yesterday. Gave me the exact sound I was looking for :D waiting on my Lund tune still to see what kind of difference there is from the unknown tune that was already on it from like 3-4 years ago. But it'll make me feel a lot better knowing it was tuned by someone good. What do you guys think I should do next? I don't want anything too crazy for a little while. But oh man are Yotes fun as hell to drive.

*EDIT* I did order one of those all in one gauges too from AM as well as the Roush vent pod, I forgot the name already oops. But I'm a nerd for wanting to know afr and things like that. Can't hurt anything.
Thanks, I'll most likely start with suspension. So far it only has lowering springs lol. It does have a Barton short throw already though.
I will always say that, when these cars have bolt ons, go with Lund. My car ran HARD for what it was. intake/x pipe/Lund and I was doing 94-96 in the 1/8th... If you want to do some cheap mods that make a hell of a difference, do as Pauly said.

-Offroad X
-Lund tune
-LCA's
-LCA relocation brackets
-UCA

BMR all the way on the suspension goodies too; they're on their A game. I can say that with those mods I listed above, I went from losing to my friends bolt on 2000 Cobra R by about 5 lengths to me winning by 1-1.5. With literally an offroad x and a Lund base tune.

---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------

Pauly; my car has been giving me fits since I got it back. Vacuum leak I can't find, throwing missfire codes, now Chris thinks it's making more boost than my Leash is saying because it is moving a lot of air. Wish I woulda sold this thing when I had the chance lol
 

·
I'm doing it wrong
Joined
·
5,495 Posts
I will always say that, when these cars have bolt ons, go with Lund. My car ran HARD for what it was. intake/x pipe/Lund and I was doing 94-96 in the 1/8th... If you want to do some cheap mods that make a hell of a difference, do as Pauly said.

-Offroad X
-Lund tune
-LCA's
-LCA relocation brackets
-UCA

BMR all the way on the suspension goodies too; they're on their A game. I can say that with those mods I listed above, I went from losing to my friends bolt on 2000 Cobra R by about 5 lengths to me winning by 1-1.5. With literally an offroad x and a Lund base tune.

---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------

Pauly; my car has been giving me fits since I got it back. Vacuum leak I can't find, throwing missfire codes, now Chris thinks it's making more boost than my Leash is saying because it is moving a lot of air. Wish I woulda sold this thing when I had the chance lol

Thanks for the suggestions too, I'll for sure go with BMR. Offroad X can be an issue with where I live, so I'm hesitant on it. I am waiting on my Lund tune though, ordered it last week, hopefully I'll have it this week. Installed the Aeroforce gauge and Roush vent pod today during my lunch break, mainly for the afr. Idle it fluctuates from 13.8-14.2 wot is a steady 11.8. Pretty sure those aren't ideal numbers, and I know the Lund tune will sort all of that out. On a side note, I can't get enough of listening to my Borla S type axleback with resonator deletes lol. Sounds perfect to me. :3gears
 
10381 - 10400 of 10639 Posts
Top