terminator swap in fox

93dohc s/c · May 8, 2008

im doing a terminator swap in my fox does anyone know how can i make it fit with stock or smallest hood possible as in shorter motor mounts ?

FM1R · May 9, 2008

Cut down your motor mounts. In the Novemeber '07 issue of MM&FF they tackle that issue. Also I think that they mentioned a compny that made a custom K member for this application. Goodluck, it's gonna be BMF when finished.

mustangrebuilder · May 9, 2008

i have seen a k member just for this swap.

check out like bmr

93dohc s/c · May 9, 2008

terminator swap

my tublar k member thats in my cobra now should bolt in my fox correct

FM1R · May 9, 2008

93dohc s/c said:
my tublar k member thats in my cobra now should bolt in my fox correct

IDK, if it would.

1StockGT · May 10, 2008

There's a guy I know on the local forum I frequent that is doing the same swap into a notch. From what he's saying it's alot of work, It should be an 8 second car when he's finished though. Good luck with the project though.

baine21225 · May 12, 2008

i know that AJE makes all their kmembers to order, i'd call them and see if they can fab you one up, then call kooks and have them do up some nice headers

ReverendDexter · May 13, 2008

I remember reading about a full Terminator swap into an '84 Collector Edition (one of the cars with the Shelby stripes/GT-350 badging). IIRC, the only exterior mods were the '03 Cobra wheels, so it must be possible to fit the motor under the stock hood.

FM1R · May 13, 2008

MM&FF put one in a notchback, it has been done numerous times already. I'm anxious to see the pics of this buildup. It's been a dream of mine to build a '93 Cobra clone, and swap in a KB'd or Whipple'd termie w/ 6 spd, and IRS.

baine21225 · May 13, 2008

sounds like a lot of $$$$$

Goblin · May 14, 2008

baine21225 said:
i know that AJE makes all their kmembers to order, i'd call them and see if they can fab you one up, then call kooks and have them do up some nice headers

Kooks?????? I was going to have Kooks do my headers for my mod fox swap, and they wanted over $2500!

93 > You'll need atleast a 2.5" cowl hood, or a k-member, with drop mounts if you want to use the stock hood. Good luck with your swap, you'll need it. I didnt have any with mine!

AnglicoGT98 · May 14, 2008

I researched this same thing for about a month. Be ready for ALOT of work and extra $$$ to put into it. You're talking ATLEAST a 10 year difference in technology so almost nothing will be able to swap over on that end. I am not trying to insult you're inteligence by any means, but make sure you go through EVERYTHING before going ahead with this....PITA. (And as a side note...if you need a Termi engine I have one putting out over 450 HP for sale)

baine21225 · May 14, 2008

Goblin said:
Kooks?????? I was going to have Kooks do my headers for my mod fox swap, and they wanted over $2500!

93 > You'll need atleast a 2.5" cowl hood, or a k-member, with drop mounts if you want to use the stock hood. Good luck with your swap, you'll need it. I didnt have any with mine!

that price is ridiculous

93dohc s/c · May 16, 2008

terminator swap

attempted to bolt up 2003 cobra k member it all lines up but i got to cut out the sway bar mount the 1 on the driver side hit the alt... keep u guys posted pics comming soon

93dohc s/c · May 16, 2008

terminator swap

does anyone know of a trany cross member for this swap

FM1R · May 16, 2008

I'm guessing that you'll have to fab that up.

terminator swap in fox

93dohc s/c

FM1R

mustangrebuilder

93dohc s/c

FM1R

1StockGT

baine21225

ReverendDexter

FM1R

baine21225

Goblin

AnglicoGT98

baine21225

93dohc s/c

93dohc s/c

FM1R

Top Contributors this Month

Recommended Communities